Difference between revisions of "SimpleMotion V2 compatible communication interface device"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Known good devices)
(List of tested devices)
 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
 
===Known good devices===
 
===Known good devices===
 
*[[SimpleMotion V2 USB adapter]]
 
*[[SimpleMotion V2 USB adapter]]
*[http://www.ftdichip.com/ FTDI] USB UART based RS485 adapters]]
+
*[[DIY SimpleMotion V2 adapter]]
 +
*[http://www.ftdichip.com/ FTDI] USB UART based RS485 adapters
  
 
===Known incompatible devices===
 
===Known incompatible devices===
 
None yet
 
None yet
 
[[Category:SimpleMotion]]
 
[[Category:SimpleMotion]]

Latest revision as of 11:03, 17 September 2015

This page lists known good interface devices for SimpleMotion V2 bus.

Compatibility in theory[edit | edit source]

To communicate with SimpleMotion V2 bus, a RS485 serial port is needed. The requirements are:

  • 460800 PBS bitrate support
  • 8 data bits + 1 data bit
  • Half duplex RS485 with 3 wires: ground, A, B
  • Visible as serial port on a PC (COM port in Windows, /dev/ttyNNN in Unix)

List of tested devices[edit | edit source]

Known good devices[edit | edit source]

Known incompatible devices[edit | edit source]

None yet