Difference between revisions of "SimuCUBE LED indicators"

[checked revision]

Revision as of 11:24, 29 June 2016

SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.

For IONI LED status indicators, please refer to IONI LED indicators.

SimuCUBE LED indicators.

LED #	Color	Indication	Technical information
LED3	Green	Power on	Lit when on board 5V signal power is on
LED4	Green	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD15.
LED5	Red	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD14
LED4	Green	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD13

Revision as of 22:34, 28 June 2016 (edit) Tero K (Talk \| contribs) (Tag: VisualEditor) ← Older edit	Revision as of 11:24, 29 June 2016 (edit) (undo) Tero K (Talk \| contribs) m (Tero K moved page SimuCUBE user guide/LED indicators to SimuCUBE LED indicators) Newer edit →
(No difference)