SimuCUBE LED indicators
From Granite Devices Knowledge Wiki
SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.
IONI[edit | edit source]
For IONI LED status indicators, please refer to IONI LED indicators.
SimuCUBE[edit | edit source]
SimuCUBE LED indicators[edit | edit source]
|LED #||Color||Indication||Technical information|
|LED3||Green||Power on||Lit when on board 3.3V signal power is on|
|LED4||Green||MMOS: Clipping led. SimuCUBE Firmware: Clipping led.||Connected to STM32F4 I/O pin PD15.|
|LED5||Red||Firmware controlled, TBA||Connected to STM32F4 I/O pin PD14|
|LED6||Green||Firmware controlled, TBA||Connected to STM32F4 I/O pin PD13|