Difference between revisions of "SimuCUBE LED indicators"

[checked revision]

Revision as of 22:34, 28 June 2016

SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.

For IONI LED status indicators, please refer to IONI LED indicators.

SimuCUBE LED indicators.

LED #	Color	Indication	Technical information
LED3	Green	Power on	Lit when on board 5V signal power is on
LED4	Green	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD15.
LED5	Red	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD14
LED4	Green	Firmware controlled, TBA	Connected to STM32F4 I/O pin PD13

@@ Line 1: / Line 1: @@
+SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.
 == IONI ==
 For IONI LED status indicators, please refer to [[IONI & IONICUBE user guide/LED indicators|IONI LED indicators]].
@@ Line 10: / Line 12: @@
 |-
 !  LED # !! Color || Indication
+!Technical information
 |-
-| LED3 || Green || +3.3 V logic voltage is ok.
+| LED3 || Green || Power on
+|Lit when on board 5V signal power is on
 |-
-| LED4 || Green || FirmWare related. Connected to STM32F4 I/O pin PD15. Mmos: torque clipping.
+| LED4 || Green || Firmware controlled, TBA
+|Connected to STM32F4 I/O pin PD15.
 |-
-| LED5 || Red || Firmware related. Connected to STM32F4 I/O pin PD14.
+| LED5 || Red || Firmware controlled, TBA
+|Connected to STM32F4 I/O pin PD14
 |-
-| LED4 || Green || Firmware related. Connected to STM32F4 I/O pin PD13.
+| LED4 || Green || Firmware controlled, TBA
+|Connected to STM32F4 I/O pin PD13
 |}
 {{next|[[:Category:SimuCUBE troubleshooting|Troubleshooting]]}}