Difference between revisions of "Granite Devices servo motors"

Revision as of 08:28, 4 April 2016

Granite Devices supplies selection of brushless / AC servo motors. This page summarizes the motors and their features.

BL series motors

BL70-300 series motor (300W)

BL series motors are brushless servo motors suitable for most applications.

Standard features

• Encoder resolution (specified on the web shop description):
  • 1000 PPR (4 000 counts/rev)
  • 2500 PPR (10 000 counts/rev)
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Range from 42W to 660W
• Medium inertia
• Cabling (specified on the web shop description):
  • Standard 2.5-3.0 meter cables fixed on motor with built in connectors for IONI
  • Short cables on motor and extension cable set with IONI compatible connectors available separately

Data sheets

BL42 and BL70 series specifications (PDF)

BL70 series 3D models Note: shaft size specification of BL70-300 changed (see 2D drawings on catalog). 3D models not updated at the moment.

Purchasing

Servo motors on our Web shop for IONI

KANZ series motors

400 W and 950 W sizes of KANZ series motors alongside of Argon servo drive.

KANZ series servo motors are sinusoidally commutated low inertia motors.

Standard features

• 2500 PPR (10 000 counts/rev) encoder
• Range from 30W to 15kW, stocked range typically 400W to 950W.
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Come with pre-assembled encoder cable for Argon and Ion drives
• Available for various supply voltages (on order)
• Available with holding brake (on order)

Data sheets

KANZ series specifications (PDF). Full encoder pin map (PDF) for those who use it with other drive than Argon/Ion.

Purchasing

Servo motors on our Web shop for Argon

Quick commissioning guide

Commissioning of KANZ servo motors

Comparison