Difference between revisions of "SimuCUBE firmware releases"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(→‎SimuCUBE firmware files)
(→‎SimuCUBE firmware files)
Line 13: Line 13:
 
|0.7.1 / 0.7.4
 
|0.7.1 / 0.7.4
 
|Public beta release
 
|Public beta release
−
|
+
|[https://github.com/SimuCUBE/Firmware-Releases]
 
|Changes and fixes:
 
|Changes and fixes:
 
* Some profile settings were being set to default when running the  firmware update wizard
 
* Some profile settings were being set to default when running the  firmware update wizard

Revision as of 18:40, 19 September 2017

SimuCUBE firmware user guide

The user guide for the SimuCUBE firmware can be found here: SimuCUBE Firmware User Guide


SimuCUBE firmware files

Stable SimuCUBE firmware is not yet published. Until then, please consider using MMos firmware for production purposes.

Firmware / Configuration

Tool version

Closed / Open / Official FW file Description/changes/new features
0.7.1 / 0.7.4 Public beta release [1] Changes and fixes:
  • Some profile settings were being set to default when running the firmware update wizard
  • Ioni filter parameters are no longer being read to the active profile, overwriting the profile values, when running the motor configuration wizard
  • Changed TBW to 1000Hz as default for all new profiles and also for the default read-only profile.
  • Minor text changes in firmware update wizard
0.7.0 / 0.7.3 Closed beta release not public New features:
  • Profile can be copied

Bug fixes:

  • Profile name did not get applied and saved if only profile name was edited
  • Configuration tool crashed if user canceled or finished the Firmware Update wizard
0.7.0 Closed beta release not public New features:
  • Working digital button inputs
  • Profile management
  • Analog settings .ini-file import/export

Bug fixes:

  • Settings change by some amount at saving or load from IONI drive.
<0.7.0 Closed beta release(s) not public No change history for these early firmware releases.

IONI firmware

As SimuCUBE requires an IONI Servo & Stepper Drive, it is recommended to keep the on-board IONI firmware at latest release. SimuCUBE firmware has the IONI firmware bundled in, and the IONI firmware will be automatically updated if the current IONI firmware on the drive is too old. For manual firmware updates, see IONI firmware releases and Granity user guide/Uploading a firmware.

Motor configuration files for Granity (.drc)

See List of motors for SimuCUBE for sample configuration settings & files for various SimuCUBE compatible motors.

This page is work in progress state. Do not use any of this information until this notice has been removed.
Retrieved from "https://granitedevices.com/w/index.php?title=SimuCUBE_firmware_releases&oldid=6234"