Difference between revisions of "SimuCUBE firmware releases"

• Unfortunately, this version will clear all profile settings. Please take note of all your settings.
• Precautions have been made to minimize this being required in the future.

New features:

• Profiles can be saved into profilesettings.ini file and imported from that file. Imported profiles are added, they will not overwrite user's previous profiles.
• Force scaling is done by setting MMC on IONI drive instead of scaling the torque that goes to drive. This increases the fidelity. NOTE: To change maximum MMC, upload a new DRC file with new setting using the motor configuration wizard, or use Granity and after setting new MMC, immediately run the wizard again without uploading a new DRC file.

Changes and fixes:

• Analog button debounce time has been increased from 10 ms to 20 ms.
• Steering angle / centering value was not saved correctly if the index point was sufficiently off-center. This was evident on high-resolution encoders.
• Maximum number of profiles has been reduced to 500.
• Game-set torque could easily overcome the Bumbstop effect torque, making the wheel spin uncontrollably. This has been fixed.
• Damping filter was being sent to IONI with setting of 0.0 % if game set a damping effect. This was unintended, and has been changed for this version. On-the-fly changing damping, inertia and friction effects are not being done currently.

• Some profile settings were being set to default when running the firmware update wizard
• Ioni filter parameters are no longer being read to the active profile, overwriting the profile values, when running the motor configuration wizard
• Changed TBW to 1000Hz as default for all new profiles and also for the default read-only profile.
• Minor text changes in firmware update wizard

• Profile can be copied

Bug fixes:

• Profile name did not get applied and saved if only profile name was edited
• Configuration tool crashed if user canceled or finished the Firmware Update wizard

• Working digital button inputs
• Profile management
• Analog settings .ini-file import/export

Bug fixes:

• Settings change by some amount at saving or load from IONI drive.