Difference between revisions of "Simucube 2 documentation"
| [checked revision] | [checked revision] |
(→Service manuals) |
(→Service manuals) |
||
| Line 8: | Line 8: | ||
==Service manuals== | ==Service manuals== | ||
| + | |||
| + | '''Note: Review the instructions carefully and only perform service procedures if you feel comfortable performing them. Your reseller will always help if necessary.''' | ||
| + | |||
Problem: Wheel is slipping and center point is changing. | Problem: Wheel is slipping and center point is changing. | ||
Cause: The conical shaft adapter is slipping. This affected many of the very first produced Simucube 2 units in May 2019. | Cause: The conical shaft adapter is slipping. This affected many of the very first produced Simucube 2 units in May 2019. | ||
Revision as of 16:01, 25 January 2021
This page lists all officially published documentation of Simucube 2 systems. The main Simucube 2 product website is at https:///www.simucu.be
Software
see Simucube 2 True Drive software releases
User manuals
Service manuals
Note: Review the instructions carefully and only perform service procedures if you feel comfortable performing them. Your reseller will always help if necessary.
Problem: Wheel is slipping and center point is changing. Cause: The conical shaft adapter is slipping. This affected many of the very first produced Simucube 2 units in May 2019.
Problem: Device stuck in "Waiting for drive to get ready" and does not start correctly. The E-stop button status follows the real e-stop button.
Cause: Internal cable for the power button is placed in a bad location inside the device.
Note: This service instruction is only applicable to Simucube 2 Sport and Pro R1 units (Pro with 2 power supplies) that were produced before August 2020. R1 units have a rocker switch near the one of the rear corners as a power switch, where as R2 units have a on/off toggle switch near the center of the back plate.
Problem: The external antenna connector is loose.
Cause: Loose antenna connector.
Note: Do not spin the antenna connector to not cause it to wind up and break.
