Identifying hardware model and version
This page describes how to tell which hardware vesrion of drive or accessories you have.
IONICUBE 1X
IONICUBE 1X comes in two variants:
- IONICUBE 1X, standard version
- IONICUBE 1X WIDE, with wide logic voltage input range
Identification
The party that is circled, is the logic supply voltage regulator. With standard IONICUBE 1X the height (from PCB to top) of this part is 10 mm. In IONICUBE 1X WIDE this part is about 17 mm high.
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
