Difference between revisions of "Analog setpoint"
From Granite Devices Knowledge Wiki
| [unchecked revision] | [unchecked revision] |
(Created page with "Analog reference is one of [[Reference signal|reference signal] types used in motion control. The most typical reference voltage range is +/-10V where * -10V equals the most...") |
(→Example) |
||
| Line 9: | Line 9: | ||
==Example== | ==Example== | ||
Lets assume +/-10V is used as torque reference in VSD drive. In this case 0V equals no torque, and 10V equals 100% of peak torque configured in the drive, 5V equals 50% torque etc. | Lets assume +/-10V is used as torque reference in VSD drive. In this case 0V equals no torque, and 10V equals 100% of peak torque configured in the drive, 5V equals 50% torque etc. | ||
| + | |||
| + | Peak torque can be configured to drive with [[GDtool]] as peak current limit. Torque and current are directly proportional, so torque reference is also a current reference. | ||
Revision as of 14:31, 26 March 2012
Analog reference is one of [[Reference signal|reference signal] types used in motion control.
The most typical reference voltage range is +/-10V where
- -10V equals the most negative reference (-100%)
- 0V equals zero reference
- 10V equals most positive reference (+100%)
- Any value between is interpolated linearly
Another common voltage range is 0..5V where may be zero reference may be at 2.5 VDC.
Example
Lets assume +/-10V is used as torque reference in VSD drive. In this case 0V equals no torque, and 10V equals 100% of peak torque configured in the drive, 5V equals 50% torque etc.
Peak torque can be configured to drive with GDtool as peak current limit. Torque and current are directly proportional, so torque reference is also a current reference.
