Difference between revisions of "Connecting motor to SimuCUBE"
From Granite Devices Knowledge Wiki
(Created page with "{{Picturebox|simucubeboxcabling_annotated.jpg|caption=Cabling of SimuCUBE. See the list below for details. }} ;X1 :7 pin terminal for motor power and E-stop ;X16 :Motor feedba...") |
(No difference)
|
Revision as of 13:32, 28 June 2016
Cabling of SimuCUBE. See the list below for details.
- X1
- 7 pin terminal for motor power and E-stop
- X16
- Motor feedback device/encoder input
- X3
- USB connector (HID/game controller)
- X4
USB connector (Granity/IONI configuration)
- AC
- 110-240 VAC power inlet
- X12A & X12B
- External button inputs (optional)
- X13A
- Pedal inputs (optional)
- X11B
- External analog inputs (optional)
- A
- E-Stop (normally closed/conducting switch)
- B
- Motor power cable
- C
- Motor encoder cable
- D
- USB to PC (HID/game controller)
- E
- USB to PC (Granity/IONI configuration)
- F
- AC power cord.
