EMI suppression cores

From Granite Devices Knowledge Wiki
Jump to: navigation, search
Snap-on ferrite beads
Toroidal ferrite bead

EMI suppression cores a.k.a. ferrite beads are an efficient way to reduce high frequency interference from wiring. Running cables through a ferrite beads is a recommended solution attempt if signal reliability problems are encountered.

Selection

For motor control applications it is recommended to get low to medium frequency ferrite beads for maximum efficiency.

Preferred types
  • Core material designed for low to medium frequency bands (attenuation between 1-300 MHz)
  • Large enough to fit cable multiple rounds through it
Avoid (might make things worse)
  • Core material designed for high frequency bands (above 300 MHz)
  • Inductor cores
  • Iron powder cores

Warning: most ferrite & iron powder cores look same. If unsure about material properties, its most safe to purchase new low to medium frequency beads.

Where to find suitable cores

Ferrite beads are available from most electronic part distributors such as:

  • Digikey
  • Mouser
  • Farnell

Some popular ferrite bead brands:

  • Laird-Signal Integrity Products
  • Fair-Rite

Usage with VSD-E/XE drives

To solve an EMI problem its good to have selection of beads that can be tried on different cables. Most typical placement for beads:

  • USB adapter
  • CMD cable
  • Encoder cable
  • Motor output cable (all motor wires through core, multiple turns)
  • HV DC power supply cable (+ and - leads through core, multiple turns)

Note: don't run multiple cables through single core.

See also


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.