| Latest revision |
Your text |
| Line 1: |
Line 1: |
| − | {{IoniManualNav|notoc=1}}{{parent|IONI}}This is the official and latest setup guide of [[IONI Servo Drive]] and [[IONICUBE]] motherboards. Read it through before installing or operating IONI series devices.
| + | IONI & IONICUBE documentation to be released before 20.3.2015. |
| − | {{info|'''NOTE:''' This guide attempts to be as complete and precise as humanly possible, however it can never be perfect. Writers of this guide are not responsible if possible damages or losses caused by mistakes or lacks of this guide. }}
| + | |
| − | {{warning|'''IMPORTANT: '''IONI drive should be installed and operated only by qualified electricians. Dangerous voltages and mechanics may be involved and possibility of severe injury or even death is possible in case of installation or usage errors.}}
| + | |
| − | [[File:Ionicube4xfinal1260w.jpg|700px|center]]
| + | |
| − | {{clear}}
| + | |
| − | ==Setup process overview==
| + | |
| − | Read trough the guide by '''following the outline''' on the top right side of the page and follow the '''hyper links''' to subtopics provided in the articles.
| + | |
| − | {{picturebox|Ioni step1 collectthings.png|caption=Read the page [[IONI & IONICUBE user guide/List of things needed|List of things needed]] for details.}}
| + | |
| − | | + | |
| − | | + | |
| − | {{picturebox|Ioni step2 granityconnection.png|caption=Connect drive to PC with [[SimpleMotion V2 USB adapter]] and [[Granity]] to test connection, upgrade firmware if necessary and to learn Granity. If you're already familiar with all this, you may skip this step. Read the article [[IONI & IONICUBE user guide/Making the first Granity connection|Making the first Granity connection]].}}
| + | |
| − | | + | |
| − | | + | |
| − | {{picturebox|Ioni step3 wiring.png|caption=Carefully do the full wiring of the servo system. Consult an qualified electrician if necessary as dangerous voltages will be present. Before powering up, triple check everything by using multimeter to find short circuits. Read the main article [[Argon user guide/Wiring|Wiring]].}}
| + | |
| − | | + | |
| − | | + | |
| − | {{picturebox|Step4 tuningbaremotor.png|caption=Power-up the system and connect again with Granity. Now set-up the motor to work as intended. See the main article [[IONI & IONICUBE user guide/Drive parameterization|Drive parameterization]]. If you already have a working configuration to your motor model, you may just load the settings file to the drive.}}
| + | |
| − | | + | |
| − | | + | |
| − | {{picturebox|Step5 tuningmachine.png|caption=After motor and drive are fully functional, connect motor to the mechanical load and find the optimum velocity or position control gains. Read the main article [[Servo motor tuning guide]].}}
| + | |
| − | | + | |
| − | ==Troubleshooting==
| + | |
| − | In case of troubles, refer to the articles in [[:Category:Troubleshooting|general troubleshooting category]] and [[:Category:IONI troubleshooting|IONI troubleshooting category]].
| + | |
| − | | + | |
| − | {{next|[[IONI & IONICUBE user guide/List of things needed]]}}
| + | |
| − | | + | |
| − | [[Category:IONI]]
| + | |
| − | [[Category:Setup_guides]]
| + | |
