Motor types

From Granite Devices Knowledge Wiki
Revision as of 09:53, 2 May 2012 by WikiAdmin (Talk | contribs)


Jump to: navigation, search
Typical servo motor with encoder feedback

Position, velocity and torque/force control applications mainly rely on two main categories of motors: servo motors and stepping motors.

Servo motor
Electromechanical actuator with feedback allowing precision closed loop motion control and monitoring. Servo motor also enables precise torque limitation to gain safety.
Stepping motor
A low cost alternative to servo motors and can be operated without feedback devices.

Construction

Servo motor consists two main parts:

  • Motor part - typically electromagnetic device that produces torque or force when driven with current
  • Feedback device - typically electronic device that outputs measurement information such as shaft angle or velocity

Stepping motors can be used without any feedback device.

Shapes

Motors and feedback devices come mainly in two shapes:

  • Rotary
  • Linear

Shape of motor doesn't change their electromechanical principle so both types of motors can be driven with same drives.

Motor technologies

List of electromagnetic motor part types.

AC

Typical AC (alternating current) servo motor is a 3 phase permanent magnet syncronous machine. This type of motors are driven by 3 wires each driving one phase coil. In ideal case 3 phase AC servo is driven by sinusoidal current waveforms that are synchronized to the permanent magnet rotor.

BLDC

BLDC (brushless DC) is very similar to AC motor with only expection that it is desgined to be driven by trapezoidal current waveforms instead of sinusoidal. BLDC motors can always be driven with same drives regardless of current waveform matching.

Brush DC

Brush DC (direct current) motors typically have permanent magnet stator and rotor with mechanical commutator with brushes.

Stepping motor

Stepper motors are high pole count permanent magnet brushless motors with 2 or 3 phase windings. High pole count enables position control without feedback devices but with several drawbacks such as risk of lost position.

Comparison

Comparison of motor technologies

Stepping motor DC servo BLDC servo AC servo
Closed loop No Yes Yes Yes
Torque control No, inpractical Yes Yes Yes
Velocity control Yes Yes Yes Yes
Position control Yes Yes Yes Yes
Available speed range Low, Medium Medium High Highest
Rated torque vs size High Low Medium Medium
Dynamic performance Low, medium Medium High High
Motion smoothness Low to high Medium Medium High
Endurance High Medium High High
Energy efficiency  Low, medium Medium High  High
Safety concerns No safe torque limit,

loss of position, hot surface

Runaway if feedback lost

See also


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.