Stepping motor
Stepping motor a.k.a. stepper is a popular electric motor type for low cost positioning applications.
Operation principle[edit | edit source]
Steppers are technically permanent magnet brushless or AC motors that have high magnetic pole count. High pole count allows the stepping operation of motor without any feedback devices. Typical stepping motor has 100 magnetic poles which yields motor resolution of 200 full steps per revolution. Resolution can be further increased by using half-stepping or microstepping.
Properties[edit | edit source]
- Pros
- Cheap motors and drives available
- Can provide smooth motion with microstepping
- Sufficient accuracy for many uses
- Long life time
- Cons
- Risk of motor stalling due to resonance or overload
- Vibration and resonance
- Non-linearity of steps (angle between microsteps not constant)
- Heating and energy usage even at stand still
Suggested drives[edit | edit source]
IONI drive has been designed for servo and stepping motors. It offers three operating modes with steppers including closed loop mode and open loop mode with resolution of 25600 steps/revolution. For more information, see Using stepping motor with IONI.
See also[edit | edit source]
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
