Difference between revisions of "VSD-E and VSD-XE"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[quality revision][quality revision]
(Before purchase)
(2 intermediate revisions by one other user not shown)
Line 13: Line 13:
 
| Control modes || Torque, Velocity, Position ||Torque, Velocity, Position
 
| Control modes || Torque, Velocity, Position ||Torque, Velocity, Position
 
|-
 
|-
| [[Reference signal]] types|| [[Pulse and direction]], [[Analog reference|+/-10V]], SPI, [[PWM]]||[[Pulse and direction]], [[Analog reference|+/-10V]], SPI, [[PWM]]
+
| [[Reference signal]] types|| [[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], SPI, [[PWM]]||[[Pulse and direction]], [[quadrature]], [[Analog reference|+/-10V]], SPI, [[PWM]]
 
|-  
 
|-  
 
| Support DualDC || Yes || Yes
 
| Support DualDC || Yes || Yes
Line 28: Line 28:
 
|}
 
|}
 
For detailed specifications and supported motor types, please see the [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE manual (PDF)]
 
For detailed specifications and supported motor types, please see the [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE manual (PDF)]
==Purchasing==
 
===Before purchase===
 
Before purchasing the drive, it is suggested to:
 
* Ensure product suitability for your needs:
 
** See [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE PDF manual chapter 13] for supported motor and feedback device types
 
** Check if a compatible [[reference signal]] is available from your [[Controller|controller]]
 
** Read through the drive manual to understand the product and requirements better
 
* Make clear what additional items will be needed, such as power supplies and possibly interface electronics
 
* If unsure about suitability, please send inquiry to [[Granite Devices support]] to be sure
 
 
===How to purchase===
 
VSD-E base price in single quantities is €199 and VSD-XE €243 excluding [http://en.wikipedia.org/wiki/Value_added_tax VAT]. Both models are currently under active production and can be purchased from [http://granitedevices.mycashflow.fi/category/4/drive-electronic GD Web shop] or from any [http://granitedevices.fi/index.php?q=how-to-buy GD distributor].
 
 
 
==Applications==
 
==Applications==
 
===Motion control===
 
===Motion control===
Line 50: Line 37:
 
===Other uses===
 
===Other uses===
 
VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the [[PWM]] output.
 
VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the [[PWM]] output.
* High power LED driver (up to 160 VDC led strings) with dimming
+
* High power LED driver with dimming (up to 160 VDC led strings)  
 
* High power [http://en.wikipedia.org/wiki/Thermoelectric_cooling thermoelectric cooling] driver
 
* High power [http://en.wikipedia.org/wiki/Thermoelectric_cooling thermoelectric cooling] driver
 +
==Key features==
 +
===Single axis a.k.a Evolution mode===
 +
List of key features:
 +
*Easy setup via [[GDtool]] software
 +
*[[SimpleMotion]] control library for PC, C/C++/C#, LabVIEW etc
 +
*Various low level command inputs ([[Pulse and direction|pulse/dir]], [[PWM]], [[quadrature]], [[Analog reference|±10V]])
 +
*Easy connection to fieldbuses like EtherCAT or CANopen (more info)
 +
*Most AC/BLDC/DC and linear servo motors supported
 +
*Advanced sinusoidal field oriented control (FOC)
 +
*True current control protects equipment and boosts responsiveness
 +
*Reliability guaranteed by wide safety margins and quality components 
 +
*Electrical & mechanical braking of motor in faults & disable
 +
*Fully automatic internal homing controller
 +
*Optimized for CNC and machine automation
 +
*Robust 200V 60A MOSFET power stage
 +
*Panel installation, 19" rack compatible.
 +
*Regenerative brake resistor output
 +
*Hard to kill: short circuit, over current, over temperature, I²t, over voltage and under voltage protections
 +
*Advanced positioning with acceleration limit and smoothing
  
==DualDC==
+
See also:
 +
*[http://www.granitedevices.fi/index.php?q=servo-drive-vsd-e VSD-E/XE Evolution mode product site]
 +
 
 +
===DualDC mode===
 
A special feature of VSD-E/XE is that it can control two indepdendent brush DC servo motors on single drive. This mode is achieved by downloading a freerly available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.  
 
A special feature of VSD-E/XE is that it can control two indepdendent brush DC servo motors on single drive. This mode is achieved by downloading a freerly available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.  
  
 
*[http://granitedevices.fi/index.php?q=vsde-dualdc-servo DualDC web site]
 
*[http://granitedevices.fi/index.php?q=vsde-dualdc-servo DualDC web site]
 +
==Purchasing==
 +
===Before purchase===
 +
Before purchasing the drive, it is suggested to:
 +
* Ensure product suitability for your needs:
 +
** See [http://granitedevices.fi/assets/files/vsd-e_160_manual.pdf VSD-E/XE PDF manual chapter 13] for supported motor and feedback device types
 +
** Check if a compatible [[reference signal]] is available from your [[Controller|controller]]
 +
** Read through the drive manual to understand the product and requirements better
 +
* Make clear what additional items will be needed, such as power supplies and possibly interface electronics
 +
* If unsure about suitability, please send inquiry to [[Granite Devices support]] to be sure
 +
 +
===How to purchase===
 +
VSD-E base price in single quantities is €199 and VSD-XE €243 excluding [http://en.wikipedia.org/wiki/Value_added_tax VAT]. Both models are currently under active production and can be purchased from [http://granitedevices.mycashflow.fi/category/4/drive-electronic GD Web shop] or from any [http://granitedevices.fi/index.php?q=how-to-buy GD distributor].
 +
 +
 
==Setup & documentation==
 
==Setup & documentation==
 
* [http://granitedevices.fi/index.php?q=servo-drive-vsd-e VSD-E/XE product web site]
 
* [http://granitedevices.fi/index.php?q=servo-drive-vsd-e VSD-E/XE product web site]

Revision as of 16:17, 30 March 2012

VSD-E/XE drive is a versatile servo drive from Granite Devices.

VSD-EXE-160-w430.jpg

Specifications

VSD-E VSD-XE
Supported motors AC, BLDC, DC (and stepper preliminary) AC, BLDC, DC (and stepper preliminary)
Supported feedback devices Quadrature encoder & Hall sensors Quadrature encoder & Hall sensors
Control modes Torque, Velocity, Position Torque, Velocity, Position
Reference signal types Pulse and direction, quadrature, +/-10V, SPI, PWM Pulse and direction, quadrature, +/-10V, SPI, PWM
Support DualDC Yes Yes
Voltage range 12-160VDC 12-160VDC
Continuous output current range for AC/BLDC 0.1-10A 0.1-14A
Continuous output current range for DC 0.1-14A 0.1-18A
Peak output current range for AC/BLDC 0.1-20A 0.1-20A
Peak output current range for DC 0.1-40A 0.1-40A

For detailed specifications and supported motor types, please see the VSD-E/XE manual (PDF)

Applications

Motion control

  • Robotics
  • CNC
  • Pick'n'place
  • Precise speed,torque or position control
  • Actuators

Other uses

VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the PWM output.

Key features

Single axis a.k.a Evolution mode

List of key features:

  • Easy setup via GDtool software
  • SimpleMotion control library for PC, C/C++/C#, LabVIEW etc
  • Various low level command inputs (pulse/dir, PWM, quadrature, ±10V)
  • Easy connection to fieldbuses like EtherCAT or CANopen (more info)
  • Most AC/BLDC/DC and linear servo motors supported
  • Advanced sinusoidal field oriented control (FOC)
  • True current control protects equipment and boosts responsiveness
  • Reliability guaranteed by wide safety margins and quality components
  • Electrical & mechanical braking of motor in faults & disable
  • Fully automatic internal homing controller
  • Optimized for CNC and machine automation
  • Robust 200V 60A MOSFET power stage
  • Panel installation, 19" rack compatible.
  • Regenerative brake resistor output
  • Hard to kill: short circuit, over current, over temperature, I²t, over voltage and under voltage protections
  • Advanced positioning with acceleration limit and smoothing

See also:

DualDC mode

A special feature of VSD-E/XE is that it can control two indepdendent brush DC servo motors on single drive. This mode is achieved by downloading a freerly available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.

Purchasing

Before purchase

Before purchasing the drive, it is suggested to:

  • Ensure product suitability for your needs:
  • Make clear what additional items will be needed, such as power supplies and possibly interface electronics
  • If unsure about suitability, please send inquiry to Granite Devices support to be sure

How to purchase

VSD-E base price in single quantities is €199 and VSD-XE €243 excluding VAT. Both models are currently under active production and can be purchased from GD Web shop or from any GD distributor.


Setup & documentation