Difference between revisions of "IONICUBE hardware revisions"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
(Tag: VisualEditor) |
(rev3) (Tag: VisualEditor) |
||
| Line 21: | Line 21: | ||
* Fixed an issue where pin on X axis GPO1 (X5 connector pin 11) logic high voltage was clamped to approximately 2.0 Volts instead of nominal 3.3V output level | * Fixed an issue where pin on X axis GPO1 (X5 connector pin 11) logic high voltage was clamped to approximately 2.0 Volts instead of nominal 3.3V output level | ||
|On board print "IONICUBE Rev 2 (009)" | |On board print "IONICUBE Rev 2 (009)" | ||
| + | |- | ||
| + | |1.2017 | ||
| + | |IONICUBE | ||
| + | |3 | ||
| + | | | ||
| + | * On board USB connector shell connected to GND to eliminate occasional connection interruptions with longer than 2 meter USB cables | ||
| + | |On board print "IONICUBE Rev 3 (010)" | ||
|} | |} | ||
| + | == See also == | ||
| + | * [[IONI hardware revisions]] | ||
[[Category:IONICUBE]] | [[Category:IONICUBE]] | ||
[[Category:Lists]] | [[Category:Lists]] | ||
Latest revision as of 15:10, 31 October 2017
List IONICUBE drive hardware revisions and changes.
| Release date | Models | Device revision | Changes & Impact | How to identify |
|---|---|---|---|---|
| 5.2015 | IONICUBE | 1 | Initial version | On board print "IONICUBE Rev 1 (007)" |
| 12.2016 | IONICUBE | 2 |
|
On board print "IONICUBE Rev 2 (009)" |
| 1.2017 | IONICUBE | 3 |
|
On board print "IONICUBE Rev 3 (010)" |
