Granite Devices now hiring into their core development team - Discover opportunity

IONICUBE

From Granite Devices Knowledge Wiki
Jump to: navigation, search
IONICUBE
Ionicubesteeltable m.jpg
Device type 4 axis motherboard for IONI drives
Model number IONICUBE
Supported motors AC, DC, BLDC, Linear, Stepper
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage Same as IONI specifications
General
Web site Granite Devices IONICUBE
Compliance CE (EMC & LVD directives)
3D model IGES, STEP, 2D PDF
Video showing three axis CNC control with IONICUBE and IONI drives

IONICUBE is a 1-4 axis motherboard for IONI Servo Drives. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.

Features[edit | edit source]

IONICUBE has been designed multiaxis robotic systems such as CNC machines in mind. On-board features include:

  • Carry up to 4 IONI drives
  • On-board regenerative braking resistor
  • Support end-of-travel switches and homing switches
  • Motor holding brake outputs & drivers for each axis
  • Two 26 pin I/O and setpoint signal connectors
    • X4 connector is directly connectible to traditional CNC controllers (parallel port, SmoothStepper etc).
    • X5 connector for extra I/O for drives and analog setpoint inputs for custom applications
  • No separate break-out-boards needed
  • Charge pump enable input for safety
  • E-stop switch input (safe torque off)
  • PWM to 0-10V converter for VFD spindle
  • Two drivers for external relays
  • ARGON Servo Drive compatible encoder connector pin-out
  • RJ45 connectors for SimpleMotion V2 usage and configuration
  • On-board 1.5A 5V regulator to power drive logic and feedback devices
  • New on revision 2: on-board Mini USB connector eliminating the requirement of RJ45 cabling and external SimpleMotion V2 adapter

User guide[edit | edit source]

See also[edit | edit source]


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.