Difference between revisions of "CNC with Granite Devices drives"

Revision as of 19:26, 28 August 2014

CNC tooling machines (mills & lathes) are one of the largest target applications of Granite Devices servo drives. This page lists needed items and steps to realize a working CNC system. plementation of motor control. If

Needed items

Common items for all drives

• A CNC controller, such as Mach3 or LinuxCNC
• Wiring materials (calbing & connectors etc):
  • To make connection between motors and drives
  • To make wiring between controller and drive. This can be aided by various third party break-out-boards (BOBs).

Argon based system

With Argon a complete CNC consists:

• Argon servo drives, 1 pcs per axis
• Motor compatible with Argon
• Items that are needed to set-up and operate Argon drive

Argon package comes with mating connectors to the drive.

VSD-E based system

With VSD-E and VSD-XE a complete CNC consists:

• VSD-E/XE drive
  • If using brush-DC servo motors in DualDC mode of drive, one drive is needed per two servo motors
  • If using AC/BLDC motors or brush-DC motors in single axis mode, one drive per servo motor is needed
• A compatible servo motor, see VSD-E/XE manual chapter 13 for details
• 12 VDC power supply for drive logic (low power)
• 12-160 VDC power supply for motor (high power). For sizing and implementation of this, see VSD-E/XE manual.
• One FTDI USB adapter is needed for configuration of any number of drives

VSD-E/XE does not include mating connectors for the drive. VSD-E/XE installation kit is available separately through Granite Devices web shop.