Difference between revisions of "Granite Devices servo motors"

Revision as of 20:30, 5 December 2020

Granite Devices supplies selection of brushless / AC servo motors. This page summarizes the motors and their features.

SPIN series motors

SPIN Series 200W low voltage AC servo motor

SPIN series motors are sinusoidal low voltage AC servo motors suitable for low voltage drives, such as IONI with 48 - 60 VDC power supply.

Features

• 2500 PPR (10 000 counts/rev) encoder
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Designed to deliver full speed and torque output at standard 48 - 60 VDC drive power supplies
• Range from 100W to 400W
• Pre-made cables available for IONICUBE systems (specified on the web shop description)

Data sheets

SPIN Series 100W servo motor specifications (PDF)

SPIN Series 200W servo motor specifications (PDF)

SPIN Series 200W servo motor 3D model (STEP)

SPIN Series 400W servo motor specifications (PDF)

Purchasing

SPIN Servo motors on GD Web store

MiGE series motors

400W MiGE AC servo motor

MiGE motors are sinusoidally commutated low inertia AC servo motors. Characteristics are similar to KANZ series motors.

Standard features

• 2500 PPR (10 000 counts/rev) encoder
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Come with cable middle connectors that plug into pre-assembled encoder & power cable for Argon drives (ordered separately)
• Standard operating voltage of 200 VAC

Data sheets

MiGE series specifications (PDF)

Purchasing

Servo motors on our Web shop for Argon

Drive configuration files

See Servo drive configuration files

BL series motors (not for new designs)

BL70-300 series motor (300W)

BL series motors are brushless servo motors suitable for most applications.

Standard features

• Encoder resolution (specified on the web shop description):
  • 1000 PPR (4 000 counts/rev)
  • 2500 PPR (10 000 counts/rev)
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Range from 42W to 660W
• Medium inertia
• Cabling (specified on the web shop description):
  • Standard 2.5-3.0 meter cables fixed on motor with built in connectors for IONI
  • Short cables on motor and extension cable set with IONI compatible connectors available separately

Data sheets

BL42 and BL70 series specifications (PDF)

BL70 series 3D models Note: shaft size specification of BL70-300 changed (see 2D drawings on catalog). 3D models not updated at the moment.

Purchasing

Non-stocked, on request only

KANZ series motors (not for new designs)

400 W and 950 W sizes of KANZ series motors alongside of Argon servo drive.

KANZ series servo motors are sinusoidally commutated low inertia motors. Characteristics are similar to MiGE series motors.

Standard features

• 2500 PPR (10 000 counts/rev) encoder
• Range from 30W to 15kW, stocked range typically 400W to 950W.
• Integrated Hall sensor for fast power-on and suitability for vertical axis
• Come with pre-assembled encoder cable for Argon and Ioni drives
• Available for various supply voltages (on order)
• Available with holding brake (on order)

Data sheets

KANZ series specifications (PDF). Full encoder pin map (PDF) for those who use it with other drive than Argon/Ion.

Purchasing

Non-stocked, on request only

Quick commissioning guide

Commissioning of KANZ servo motors

Comparison