Commissioning of KANZ servo motors

From Granite Devices Knowledge Wiki
Revision as of 19:31, 8 May 2014 by Tero K (Talk | contribs)


Jump to: navigation, search

This article gives tips for fast-forward installation of KANZ series Granite Devices servo motors on Argon servo drive. However, this article is not complete user guide for Argon, so user must be already familiar with operation of the drive or follow Argon user guide simultaneously.

Wiring

KANZ motors come with pre-assembled cables for Argon servo drive (encoder and motor part). However, some motor models include excessive 4-pin terminal for motor part that needs to be stripped away.

  • The excessive 4-pin connector that need to be cut away. Stripping approx 3-4 cm of black outer insulation is recommended to make space for EMI suppression cores.

  • Strip wire ends. Cutting U,V,W about 1 cm shorter than PE is recommended for safety if cable is being pulled by force (so that PE is the last to disconnect).

  • Optional, but recommended, ferrule crimping of wire ends.

Media:KANZ Argon base settings.zip

Argon wired to KANZ annotated.jpg

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.

Retrieved from "https://granitedevices.com/w/index.php?title=Commissioning_of_KANZ_servo_motors&oldid=3197"