VSD-E and VSD-XE
| VSD-E and VSD-XE | |
|---|---|
 | |
| Device type | Servo motor drive |
| Supported motors | AC, DC, BLDC, (Stepper partially) |
| Control modes | Position, Velocity, Torque |
| Status | Active production |
| Electrical | |
| DC supply voltage | 12 - 160 VDC |
| Output current range | 0.1 - 40A |
| Setpoint signals | Pulse and direction, PWM, Quadrature, Analog, SPI |
| Feedback devices | Quadrature encoder |
| Protections | Short circuit, over current, over temperature, I²t, over voltage, under voltage, DC motor runaway, serial communication error |
| General | |
| Configuration tool | |
VSD-E/XE drive is a versatile servo drive from Granite Devices.
Contents
Applications
Motion control
- Robotics
- CNC
- Pick'n'place
- Precise speed,torque or position control
- Actuators
- 3D printers
Other uses
VSD-E series has been successfully used also in non-motion related applications mainly in torque mode (a.k.a. current control mode). In these applications a LC filter has been used after drive to smoothen out the PWM output.
- High power LED driver with dimming (up to 160 VDC led strings)
- High power thermoelectric cooling driver
Key features
Single axis a.k.a Evolution mode
List of key features:
- Easy setup via GDtool software
- SimpleMotion control library for PC, C/C++/C#, LabVIEW etc
- Various low level command inputs (pulse/dir, PWM, quadrature, ±10V)
- Easy connection to fieldbuses like EtherCAT or CANopen (more info)
- Most AC/BLDC/DC and linear servo motors supported
- Advanced sinusoidal field oriented control (FOC)
- True current control protects equipment and boosts responsiveness
- Reliability guaranteed by wide safety margins and quality components
- Electrical & mechanical braking of motor in faults & disable
- Fully automatic internal homing controller
- Optimized for CNC and machine automation
- Robust 200V 60A MOSFET power stage
- Panel installation, 19" rack compatible.
- Regenerative brake resistor output
- Hard to kill: short circuit, over current, over temperature, I²t, over voltage and under voltage protections
- Advanced positioning with acceleration limit and smoothing
See also:
DualDC mode
A special feature of VSD-E/XE is that it can control two indepdendent brush DC servo motors on single drive. This mode is achieved by downloading a freerly available DualDC firmware to the drive. DualDC mode has several restrictions compared to single axis mode due to hardware limitations.
Purchasing
Before purchase
Before purchasing the drive, it is suggested to:
- Ensure product suitability for your needs:
- See VSD-E/XE PDF manual chapter 13 for supported motor and feedback device types
- Check if a compatible reference signal is available from your controller
- Read through the drive manual to understand the product and requirements better
- Make clear what additional items will be needed, such as power supplies and possibly interface electronics
- If unsure about suitability, please send inquiry to Granite Devices support to be sure
How to purchase
VSD-E base price in single quantities is €199 and VSD-XE €243 excluding VAT. Both models are currently under active production and can be purchased from GD Web shop or from any GD distributor.
Model comparison
| VSD-E | VSD-XE | |
|---|---|---|
| Supported motors | AC, BLDC, DC (and stepper preliminary) | AC, BLDC, DC (and stepper preliminary) |
| Supported feedback devices | Quadrature encoder & Hall sensors | Quadrature encoder & Hall sensors |
| Control modes | Torque, Velocity, Position | Torque, Velocity, Position |
| Reference signal types | Pulse and direction, quadrature, +/-10V, SPI, PWM | Pulse and direction, quadrature, +/-10V, SPI, PWM |
| Support DualDC | Yes | Yes |
| Voltage range | 12-160VDC | 12-160VDC |
| Continuous output current range for AC/BLDC | 0.1-10A | 0.1-14A |
| Continuous output current range for DC | 0.1-14A | 0.1-18A |
| Peak output current range for AC/BLDC | 0.1-20A | 0.1-20A |
| Peak output current range for DC | 0.1-40A | 0.1-40A |
| Standard warranty | 1 year | 2 years |
For detailed specifications and supported motor types, please see the VSD-E/XE manual (PDF)
Setup & documentation
- VSD-E/XE manual (PDF)
- GDTool manual & Tuning guide available from GDtool 2.5 Help menu
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
