GraniteCore
GraniteCore a.k.a. GC is the motor control core developed for Granite Devices motor drives such as Argon, IONI and ATOMI.
GraniteCore variants
Due to underlying hardware differences, the GraniteCore has several variants that also have certain differences in functionality and parameterization.
| GraniteCore variant | Device models | Remarks |
|---|---|---|
| G1.0 | VSD-A | |
| G1.1 | VSD-E and VSD-XE | |
| G2.0 | ARGON | Dual CPU architecture |
| G2.1 | IONI, ATOMI | Single ARM CPU architecture |
GraniteCore major variant numbers such as G2.x together very similar from user perspective, however some differences exists and these are identified in parameter descriptions in Granity user guide.
Note that GraniteCore version tied to underlying hardware type, it is not same as firmware version.
About Argon architecture
Argon consists dual CPU architecture which run in tight synchronism and have different tasks:
- GraniteCore
- Servo control functionality for torque, velocity and position control
- High dynamic range torque control
- Dead-time distortion correction
- Control power stage directly
- Axis homing functionality
- Virtual scope to capture variables at high sample rate
- Galvanically isolated from I/O side
- Based on Digital Signal Controller
- I/O side CPU
- Feed GraniteCore with real time data consisting
- Position & velocity feedback device data
- State of physical inputs (enable, clear faults, hall sensors etc)
- SimpleMotion V2 commands to read/write parameters
- Interface different types feedback devices and setpoint inputs
- Handle SimpleMotion V2 communication
- Display device state via digital outputs and LED indicators
- Based on ARM Cortex M3 microcontroller running at 120 MHz
Benefits of the architecture
- I/O side CPU has open source firmware allowing end users to implement additional drivers for feedback devices and/or create stand-alone servo drive applications without external Controller.
- Isolation between the processors is more cost efficient and flexible than isolation individual I/O signals directly to high voltage side (a typical solution in the market)
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
