Device connection troubleshooting
This article helps finding cure for connection problems between PC and drive.
Granity
Granity requires following to establish connection:
- Compatible RS485 adapter, such as SimpleMotion V2 USB Adapter
- SimpleMotion V2 compliant drive, such as Argon
- SimpleMotion V2 calbing with termination
- Correct bus address setting on all devices in the SM V2 bus, see Setting device bus address
Typical errors
- Bus address conflicting between devices (two or more devices set to same address)
- Missing bus termination
- Device has an error state, see led indicators
- Wrong communication interface device selected from Granity
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
