CNC with Granite Devices drives

From Granite Devices Knowledge Wiki
Revision as of 19:26, 28 August 2014 by Tero K (Talk | contribs) (Needed items)


Jump to: navigation, search

CNC tooling machines (mills & lathes) are one of the largest target applications of Granite Devices servo drives. This page lists needed items and steps to realize a working CNC system. plementation of motor control. If

Needed items

Common items for all drives

  • A CNC controller, such as Mach3 or LinuxCNC
  • Wiring materials (calbing & connectors etc):
    • To make connection between motors and drives
    • To make wiring between controller and drive. This can be aided by various third party break-out-boards (BOBs).

Argon based system

With Argon a complete CNC consists:

Argon package comes with mating connectors to the drive.

VSD-E based system

With VSD-E and VSD-XE a complete CNC consists:

  • VSD-E/XE drive
    • If using brush-DC servo motors in DualDC mode of drive, one drive is needed per two servo motors
    • If using AC/BLDC motors or brush-DC motors in single axis mode, one drive per servo motor is needed
  • A compatible servo motor, see VSD-E/XE manual chapter 13 for details
  • 12 VDC power supply for drive logic (low power)
  • 12-160 VDC power supply for motor (high power). For sizing and implementation of this, see VSD-E/XE manual.
  • One FTDI USB adapter is needed for configuration of any number of drives

VSD-E/XE does not include mating connectors for the drive. VSD-E/XE installation kit is available separately through Granite Devices web shop.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.