SimpleMotion V2

From Granite Devices Knowledge Wiki
Jump to: navigation, search
SimpleMotion V2 bus used in multiaxis drive system

SimpleMotion V2 is open source and royalty free field bus for industrial devices, such as motor drives and I/O's.

SM V2 is a complete redesign of the original SimpleMotion library. The main goals have been increasing flexibility and performance while still preserving the simplicity of the API.

Main features

Parameter communications

SM V2 is based on parameter communications. This means that all commands are implemented as settable and readable numeric parameters. For example commanding axis target position could be done by setting parameter such as SMP_TARGET_REFERENCE to a desired value.

Multidrop

SM V2 is based on RS485 physical interface yielding ability to link multiple device nodes into a single data link. Each device in the bus has unique address making it possible to target the commands to specific axis.

Buffered commands

In addition to instantly executed commands, SM V2 supports buffered commands meaning that commands may sent as chunks of multiple commands that are later interpreted by devices at predefined pace. This makes it possible to implement multiaxis synchronous interpolation without requiring a real time controller. Ring buffer implementation allows running infinite length sequences of commands.

Performance

Due to relatively high bitrate of RS485 bus and byte-efficient serial protocol, SM V2 performs very well in multiaxis real time & buffered applications. At default bit rate at least 6 axis continuously interpolated motion is possible.

Safety

SM V2 physical bus incorporates a dedicated wire for emergency stopping switch. All devices in the same bus will perform safe torque off and braking once e-stop button is pressed.

Library

SM V2 applications may be implemented by using a SM V2 C-language open source library. By default the library compiles on Windows & Unix and should be easily portable to other patforms, such as microcontrollers.

Downloads

The library is currently under development, however a preliminary release with an example program is available for download from the link:SMV2VCommander.zip (33 kb). For usage instructions, see Installing Qt SDK from scratch. You can also check out the sources directly from GitHub.

The SMV2 library pre-release is also made available as pre-compiled DLL library: SimpleMotionV2_dll.zip.

Documentation


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.