Difference between revisions of "IONICUBE"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
| Line 1: | Line 1: | ||
{{Infobox drive | {{Infobox drive | ||
| − | | name = | + | | name = IONICUBE |
| image=[[File:Ionicubesteeltable m.jpg|290px]] | | image=[[File:Ionicubesteeltable m.jpg|290px]] | ||
| modelno = IONICUBE | | modelno = IONICUBE | ||
Revision as of 16:42, 26 March 2015
| IONICUBE | |
|---|---|
 | |
| Device type | 4 axis motherboard for IONI drives |
| Model number | IONICUBE |
| Supported motors | AC, DC, BLDC, Linear |
| Control modes | Position, Velocity, Torque |
| Status | Active production, started 2015 |
| Electrical | |
| DC supply voltage | Same as IONI specifications |
| General | |
| Compliance | CE (EMC & LVD directives) |
| 3D model | |
IONICUBE is a 1-4 axis motherboard for IONI Servo Drives. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.
Features
IONICUBE has been designed multiaxis robotic systems such as CNC machines in mind. On-board features include:
- Carry up to 4 ION drives
- On-board regenerative braking resistor
- Each axis can have mechanical end switches and homing switch
- Motor holding brake drivers for each axis
- The first 26 pin ribbon cable connector is laid out so that it’s directly connectible to traditional CNC controllers (parallel port, SmoothStepper etc).
- The second 26 pin connector has extra I/O for drives and analog setpoint inputs for custom applications
- No separate break-out-boards needed
- Charge-pump input for safety
- E-stop switch input (safe torque off)
- PWM to 0-10V converter for VFD spindle
- Two relay drivers
- ARGON Servo Drive compatible encoder connector pin-out
- RJ45 connectors for SimpleMotion V2 usage and configuration
- On-board 1.5A 5V regulator to power drive logic and feedback devices
