Difference between revisions of "IONICUBE"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
| Line 1: | Line 1: | ||
| − | [[File:Ionicubesteeltable m.jpg| | + | {{Infobox drive |
| + | | name = IONI | ||
| + | | image=[[File:Ionicubesteeltable m.jpg|290px]] | ||
| + | | modelno = IONICUBE | ||
| + | | drivetype = 4 axis motherboard for [[IONI]] drives | ||
| + | | motors = AC, DC, BLDC, Linear | ||
| + | | controlmodes = Position, Velocity, Torque | ||
| + | | voltage= Same as [[IONI]] specifications | ||
| + | | production = Active production, started 2015 | ||
| + | | agencies=CE (EMC & LVD directives) | ||
| + | | 3dmodel=[[Media:IONICUBE drawings 2d 3d.zip|IGES, STEP, 2D PDF]] | ||
| + | }}{{IoniManualNav|width=22em|notoc=1}} | ||
| + | |||
{{#ev:youtube|MWu8nyfBGKU|320|right|Video showing three axis CNC control with IONICUBE and IONI drives}} | {{#ev:youtube|MWu8nyfBGKU|320|right|Video showing three axis CNC control with IONICUBE and IONI drives}} | ||
IONICUBE is a 1-4 axis motherboard for [[IONI Servo Drive]]s. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, [[feedback devices]], I/O and [[SimpleMotion V2]]. | IONICUBE is a 1-4 axis motherboard for [[IONI Servo Drive]]s. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, [[feedback devices]], I/O and [[SimpleMotion V2]]. | ||
Revision as of 12:33, 25 March 2015
| IONI | |
|---|---|
 | |
| Device type | 4 axis motherboard for IONI drives |
| Model number | IONICUBE |
| Supported motors | AC, DC, BLDC, Linear |
| Control modes | Position, Velocity, Torque |
| Status | Active production, started 2015 |
| Electrical | |
| DC supply voltage | Same as IONI specifications |
| General | |
| Compliance | CE (EMC & LVD directives) |
| 3D model | |
IONICUBE is a 1-4 axis motherboard for IONI Servo Drives. IONICUBE provide four slots for IONI drives as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.
Features
IONICUBE has been designed multiaxis robotic systems such as CNC machines in mind. On-board features include:
- Carry up to 4 ION drives
- On-board regenerative braking resistor
- Each axis can have mechanical end switches and homing switch
- Motor holding brake drivers for each axis
- The first 26 pin ribbon cable connector is laid out so that it’s directly connectible to traditional CNC controllers (parallel port, SmoothStepper etc).
- The second 26 pin connector has extra I/O for drives and analog setpoint inputs for custom applications
- No separate break-out-boards needed
- Charge-pump input for safety
- E-stop switch input (safe torque off)
- PWM to 0-10V converter for VFD spindle
- Two relay drivers
- ARGON Servo Drive compatible encoder connector pin-out
- RJ45 connectors for SimpleMotion V2 usage and configuration
- On-board 1.5A 5V regulator to power drive logic and feedback devices
