Difference between revisions of "IONI & IONICUBE user guide"
| [checked revision] | [checked revision] |
| Line 1: | Line 1: | ||
| − | + | {{IoniManualNav|notoc=1}}This is the official and latest setup guide of [[IONI Servo Drive]] and [[IONICUBE]] motherboards. Read it through before installing or operating IONI series devices. | |
{{info|'''NOTE:''' This guide attempts to be as complete and precise as humanly possible, however it can never be perfect. Writers of this guide are not responsible if possible damages or losses caused by mistakes or lacks of this guide. }} | {{info|'''NOTE:''' This guide attempts to be as complete and precise as humanly possible, however it can never be perfect. Writers of this guide are not responsible if possible damages or losses caused by mistakes or lacks of this guide. }} | ||
{{warning|'''IMPORTANT:''' IONI drive should be installed and operated only by qualified electricians. Dangerous voltages and mechanics are involved and possibility of severe injury or even death is possible in case of installation or usage errors.}} | {{warning|'''IMPORTANT:''' IONI drive should be installed and operated only by qualified electricians. Dangerous voltages and mechanics are involved and possibility of severe injury or even death is possible in case of installation or usage errors.}} | ||
| − | + | {{clear}} | |
==Setup process overview== | ==Setup process overview== | ||
Read trough the guide by '''following the outline''' on the top right side of the page and follow the '''hyper links''' to subtopics provided in the articles. | Read trough the guide by '''following the outline''' on the top right side of the page and follow the '''hyper links''' to subtopics provided in the articles. | ||
Revision as of 12:50, 1 June 2015
This is the official and latest setup guide of IONI Servo Drive and IONICUBE motherboards. Read it through before installing or operating IONI series devices. | NOTE: This guide attempts to be as complete and precise as humanly possible, however it can never be perfect. Writers of this guide are not responsible if possible damages or losses caused by mistakes or lacks of this guide. |
 | IMPORTANT: IONI drive should be installed and operated only by qualified electricians. Dangerous voltages and mechanics are involved and possibility of severe injury or even death is possible in case of installation or usage errors. |
Setup process overview
Read trough the guide by following the outline on the top right side of the page and follow the hyper links to subtopics provided in the articles.
Read the page List of things needed for details.
Connect drive to PC with SimpleMotion V2 USB adapter and Granity to test connection, upgrade firmware if necessary and to learn Granity. If you're already familiar with all this, you may skip this step. Read the article Making the first Granity connection.
Carefully do the full wiring of the servo system. Consult an qualified electrician if necessary as dangerous voltages will be present. Before powering up, triple check everything by using multimeter to find short circuits. Read the main article Wiring.
Power-up the system and connect again with Granity. Now set-up the motor to work as intended. See the main article Drive parameterization. If you already have a working configuration to your motor model, you may just load the settings file to the drive.
After motor and drive are fully functional, connect motor to the mechanical load and find the optimum velocity or position control gains. Read the main article Servo motor tuning guide.
Troubleshooting
In case of troubles, refer to the articles in general troubleshooting category and IONI troubleshooting category.
 | Read next |
