Difference between revisions of "IONICUBE 1X"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
Line 27: Line 27:
 
*On-board 0.5A 5V regulator to power drive logic and [[feedback devices]]
 
*On-board 0.5A 5V regulator to power drive logic and [[feedback devices]]
 
*DIN rail mounting option
 
*DIN rail mounting option
 +
 +
==Applications==
 +
*Robotics
 +
*CNC
 +
*Distributed drive systems
 +
*Racing simulators
  
 
<sup>1</sup>) 24V I/O needs external components in certain cases
 
<sup>1</sup>) 24V I/O needs external components in certain cases

Revision as of 12:08, 31 March 2015

IONICUBE 1X
Cube1x m.jpg
Device type Single axis motherboard for IONI drives
Model number IONICUBE 1X
Supported motors AC, DC, BLDC, Linear
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage Same as IONI specifications
General
Compliance CE (EMC & LVD directives)
3D model

TBA

Features

IONICUBE 1X has been designed robotics and automation systems in mind. On-board features include:

  • Carry single IONI drive
  • On-board regenerative braking resistor drive (need just an external resistor)
  • Support mechanical end-of-travel switches and homing switch
  • Motor holding brake output with driver
  • 26 pin ribbon cable connector for I/O and setpoint signals
  • Support 3.3V, 5V and 24V1 I/O signal levels
  • Charge-pump enable input for safety
  • E-stop switch input (safe torque off)
  • ARGON Servo Drive compatible encoder connector pin-out
  • RJ45 connectors for SimpleMotion V2 usage and configuration
  • On-board 0.5A 5V regulator to power drive logic and feedback devices
  • DIN rail mounting option

Applications

  • Robotics
  • CNC
  • Distributed drive systems
  • Racing simulators

1) 24V I/O needs external components in certain cases

User guide

See also