Revision as of 09:10, 19 May 2015
This page lists examples of available mating connectors, accessories and spare parts for
IONI drive together with
IONICUBE 1X motherboard. Most parts or equivalents are available from large number of distributors. You may use
http://www.findchips.com/ to search the same or similar parts from alternative distributors.
Recommended shopping list
- Connectors and backshells for X6/X8 unless using a motor with pre-made encoder cables (like Granite Devices servo motors)
- X1 cable (RJ45 cable)
- X4/X5 connectors and flat cable
- A flat cable to D-Sub 25 connector if direct connection to parallel port based PC CNC software is desired
- EMI filters
- 24 VDC logic power supply
- HV DC bus power supply
See the list of example parts below.
Connectors
X2 connector
Description |
Manufacturer |
Part number |
Distributors and order codes
|
PLUG, D, SOLDER, 15WAY |
MULTICOMP |
5501-15PA-02-F1 |
|
Accessories
Description |
Manufacturer |
Part number |
Distributors and order codes
|
D-SUB BACKSHELL, 15WAY |
MH CONNECTORS |
DPPK15-GREY-K |
|
X1 connector
Cable assemblies
Cable used for X1 should be shielded (S/FTP or FTP, not UTP) type.
Description |
Manufacturer |
Part number |
Distributors and order codes
|
Premium patch cable 0.5m |
VIDEK |
3962-0.5 |
Farnell 1525999
|
Premium patch cable 1m |
VIDEK |
3962-1 |
|
Premium patch cable 2m |
VIDEK |
3962-2 |
Farnell 1525753
|
Premium patch cable 5m |
VIDEK |
3962-5 |
Farnell 1525755
|
Premium patch cable 10m |
VIDEK |
3962-10 |
|
Shielded patch cable 0.5m |
VIDEK |
2992-0.5 |
Farnell 1517504
|
Shielded patch cable 1m |
VIDEK |
2992-1 |
|
Shielded Patch cable 2m |
VIDEK |
2992-2 |
Farnell 1517506
|
Shielded patch cable 5m |
VIDEK |
2992-5 |
Farnell 1517509
|
Shielded patch cable 10m |
VIDEK |
2992-10 |
|
Shielded patch cable 0.5m |
Assman |
A-MCSP-80005/B-R |
Digikey A-MCSP-80005/B-R
|
Shielded patch cable 1m |
Assman |
A-MCSP-80005/Y-R |
Digikey A-MCSP-80010/Y-R
|
Shielded patch cable 2m |
Assman |
A-MCSP-80020/Y-R |
Digikey A-MCSP-80020/Y-R
|
Shielded patch cable 3m |
Assman |
A-MCSP-80050/Y-R |
Digikey A-MCSP-80030/Y-R
|
Shielded patch cable 5m |
Assman |
A-MCSP-80050/Y-R |
Digikey A-MCSP-80050/Y-R
|
Shielded patch cable 10m |
Assman |
A-MCSP-80050/Y-R |
Digikey A-MCSP-80100/Y-R
|
X4 connector
Example of DIN rail attachable IDC terminal block/breakout board.
Mating connector type is 0.1" pitch 20 pin IDC ribbon cable socket, see example (pdf).
Description |
Manufacturer |
Part number |
Distributors and order codes
|
SOCKET, IDC, 2.54MM, 20WAY |
AMPHENOL |
T812120A101CEU |
|
FLAT CABLE 20 WAY |
3M |
3302/20 300SF |
Digikey MC20M-5-ND
|
Accessories
Description |
Manufacturer |
Part number |
Distributors and order codes
|
IDC terminal block, 20WAY |
Camden boss |
CIM/202426W-IDCS |
|
Power supplies
24V logic supply
Description |
Manufacturer |
Part number |
Distributors and order codes
|
24 VDC power supply |
TDK-Lambda |
LS35-24 |
Digikey 285-1893-ND
|
24 VDC DIN rail power supply |
CUI Inc |
VDRS-20-24 |
Digikey 102-2152-ND
|
HV DC motor supply