SimuCUBE

From Granite Devices Knowledge Wiki
Revision as of 10:26, 1 September 2017 by Esa (Talk | contribs)


Jump to: navigation, search

This is the main hub to find the relevant SimuCUBE documentation for your need.

SimuCUBE main board specifications & user guide

Specification, wiring and usage of bare SimuCUBE motor control board. This guide is for you if:

  • You're designing custom force feedback system with SimuCUBE
  • Have only SimuCUBE board to assemble a custom force feedback system
  • Want to the details and specifications of SimuCUBE


Introduction
Introduction icon.jpg
 Specifications
Specs icon.jpg
 List of hardware needed
Simucube icon.jpg
 Connectors and pinouts
Connector icon.jpg
 Wiring overview
Wiring icon.jpg
 LED indicators
Guidebook icon.jpg

Assembling SimuCUBE kit

Follow this guide if you're assembling a Granite Devices SimuCUBE kit. After this guide, continue to the user guide below. This guide is for you if:

  • You have one of Granite Devices SimuCUBE kits with enclosure parts
  • Looking for hints of designing/constructing custom system around SimuCUBE
320W kit
Simucube320 icon.jpg
 480/720W kit
Simucube480 icon.jpg

SimuCUBE install guide

Follow this guide to install and configure a SimuCUBE based force feedback controller unit. This guide is for you if:

  • You have pre-assembled SimuCUBE system needing only installation cabling and configuration
  • Want to learn how to use SimuCUBE based systems


Main articles of this category


Safety

SimuCUBE based Force feedback system (FFB) pose high mechanical danger that may cause serious injuries to living beings, cause damage to external property or loss of profits. Always operate SimuCUBE based system with maximal caution.
  • Beware of very high sudden torques or vibrations produced by motor attached to SimuCUBE - these are expected even in normal operating conditions
  • Be aware that malfunction of misconfiguration may cause uncontrolled or higher than normal motor rotation or torques
  • End-user's responsibility is to ensure that motor, or items connected to the motor can not cause damage due to rotation, torque or vibration
  • Always be ready to let go from the motor or parts connected to it (i.e. take hands off the simulator wheel)
  • Make sure that a reliable stopping method is available and user reachable at all times (reliable method: unplugging AC power). Note that unplugging power might not stop motor immediately.
  • Do not try to stop spinning motor by hands or other mechanical means
  • Note that wheel, cables or other items attached to motor may hit objects or living beings and may have damaging effects. User's responsibility is to control this danger and take responsibility of the possible consequences caused by moving items.
  • Ensure that motor has been rigidly fixed to avoid it getting loose under extreme vibrations
  • Understand that the responsibilities of the manufacturer of the SimuCUBE are limited to fulfilling the technical specifications and functions of the device. The technical function includes production of high torques and speeds on a large motor. Understand that spinning motor or high torques produced by it are considered operation within specifications, so potential damages caused by such operation are not within liabilities of the manufacturer.
  • Commonly used motors may exceed torque of 30 Newton meters and rotation speed of 1000 rpm when attached to SimuCUBE
  • Due to high electric currents, motor, cables or IONI drive may get dangerously hot (skin burns, fire hazard)
For your own safety, do not operate SimuCUBE if you don't understand these dangers

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.

Retrieved from "https://granitedevices.com/w/index.php?title=SimuCUBE&oldid=6148"