Difference between revisions of "IONICUBE 1X"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Applications)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Infobox drive
 
{{Infobox drive
 
| name = IONICUBE 1X
 
| name = IONICUBE 1X
| image=[[File:cube1x m.jpg|290px]]
+
| image=[[File:ionicube1x.jpg|290px]]
 
| modelno = IONICUBE 1X
 
| modelno = IONICUBE 1X
 
| drivetype          = Single axis motherboard for [[IONI]] drives
 
| drivetype          = Single axis motherboard for [[IONI]] drives
| motors = AC, DC, BLDC, Linear
+
| motors = AC, DC, BLDC, Linear, Stepper
 
| controlmodes = Position, Velocity, Torque
 
| controlmodes = Position, Velocity, Torque
 
| voltage= Same as [[IONI]] specifications
 
| voltage= Same as [[IONI]] specifications
Line 10: Line 10:
 
| agencies=CE (EMC & LVD directives)
 
| agencies=CE (EMC & LVD directives)
 
| 3dmodel=TBA
 
| 3dmodel=TBA
 +
| url=[https://granitedevices.com/ionicube-multiaxis-servo-drive-boards/ Granite Devices IONICUBE]
 +
 
}}{{IoniManualNav|width=22em|notoc=1}}
 
}}{{IoniManualNav|width=22em|notoc=1}}
  
Line 19: Line 21:
 
*Support mechanical end-of-travel switches and homing switch
 
*Support mechanical end-of-travel switches and homing switch
 
*Motor holding brake output with driver
 
*Motor holding brake output with driver
*26 pin ribbon cable connector for I/O and [[setpoint]] signals
+
*20 pin ribbon cable connector for I/O and [[setpoint]] signals
 
*Support 3.3V, 5V and 24V<sup>1</sup> I/O signal levels
 
*Support 3.3V, 5V and 24V<sup>1</sup> I/O signal levels
*Charge-pump enable input for safety
+
*[[Charge pump enable input]] for safety
*E-stop switch input (safe torque off)
+
*E-stop switch input ([[safe torque off]])
*[[ARGON Servo Drive]] compatible encoder connector pin-out
+
*[[IONICUBE]] and [[ARGON Servo Drive]] compatible encoder connector pin-out
 
*RJ45 connectors for SimpleMotion V2 usage and configuration
 
*RJ45 connectors for SimpleMotion V2 usage and configuration
 
*On-board 0.5A 5V regulator to power drive logic and [[feedback devices]]
 
*On-board 0.5A 5V regulator to power drive logic and [[feedback devices]]
 
*DIN rail mounting option
 
*DIN rail mounting option
 +
 +
==Applications==
 +
*Distributed drive systems
 +
*Industrial automation
 +
*Robotics
  
 
<sup>1</sup>) 24V I/O needs external components in certain cases
 
<sup>1</sup>) 24V I/O needs external components in certain cases
 +
 
==User guide==
 
==User guide==
 +
* [[IONICUBE 1X electrical specifications]]
 
* [[IONI & IONICUBE user guide]]
 
* [[IONI & IONICUBE user guide]]
 
* [[IONICUBE 1X connectors and pinouts]]
 
* [[IONICUBE 1X connectors and pinouts]]
Line 35: Line 44:
 
==See also==
 
==See also==
 
* [[IONICUBE]] - 4 axis motherboard for IONI
 
* [[IONICUBE]] - 4 axis motherboard for IONI
[[category:IONICUBE]]
+
 
[[category:Hardware]]
+
[[Category:Hardware]]
 +
[[Category:IONICUBE]]

Latest revision as of 11:28, 27 March 2018

IONICUBE 1X
Ionicube1x.jpg
Device type Single axis motherboard for IONI drives
Model number IONICUBE 1X
Supported motors AC, DC, BLDC, Linear, Stepper
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage Same as IONI specifications
General
Web site Granite Devices IONICUBE
Compliance CE (EMC & LVD directives)
3D model

TBA

Features[edit | edit source]

IONICUBE 1X has been designed robotics and automation systems in mind. On-board features include:

Applications[edit | edit source]

  • Distributed drive systems
  • Industrial automation
  • Robotics

1) 24V I/O needs external components in certain cases

User guide[edit | edit source]

See also[edit | edit source]