IONI Servo & Stepper Drive

From Granite Devices Knowledge Wiki
Jump to: navigation, search
IONI
Finalioni2crop.JPG
Device type Servo & stepping motor drive
Model number IONI-11K000, IONI-11K200
Supported motors AC, DC, BLDC, Linear, Stepper
Control modes Position, Velocity, Torque
Status Active production, started 2015
Electrical
DC supply voltage 5 - 54 VDC (except 5 - 58 VDC in IONI Pro HC)
Output current range 0.1 - 15A IONI, 0.1 - 18A IONI Pro, 0.1 - 25A IONI Pro HC
Setpoint signals Pulse and direction, PWM, Analog, SimpleMotion V2
Feedback devices Quadrature encoder, SinCos encoder
General
Configuration tool Granity
Web site Granite Devices IONI
Compliance CE (EMC & LVD directives)
3D model Download-icon.png IGES & STEP
PDF version of IONI flyer. Download.

IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors). Applications of such control methods include

  • Position control, such as CNC, robotics and 3D printing
  • Velocity control, such as spindles or feeders
  • Force / torque control, such as racing simulator wheel


Ioni drive blocks.png


Commands to IONI drive can be delivered in many formats and from many sources, such as PC, PLC, microcontroller (i.e. Arduino, MBED and OEM boards) or embedded computers like Raspberry Pi. IONI understands several forms of setpoint commands:

  • Step & direction digital signals (typical stepper drive interface, good for position control)
  • Analog +/-10V signal (good for speed or torque control)
  • PWM signal (good for speed or torque control)
  • RS485 serial bus (talks SimpleMotion V2 bus protocol, open source library available)


Supported motors[edit | edit source]

As motor is not included, make sure that you have, or obtain a motor that is compatible with IONI. Learn more about motor types.

Servo motor requirements[edit | edit source]

  • Permanent magnet brush-DC, AC, brushless or linear motor
  • Motor voltage rating 12-60 VDC (IONI supply voltage is 5 - 52 VDC)
  • Motor current rating 0.1 - 25A (choose drive model accordingly, IONI Pro HC, maximum output is 25A, IONI Pro 18A, and IONI 15A)
  • Servo motor must be equipped with an supported feedback device (position sensor / encoder).

See Motor compatibility guide for more details.

Stepping motor requirements[edit | edit source]

  • Two-phase stepping motor with 0.5 - 15A current rating, no feedback device needed. Can be used in position and velocity control mode. Torque mode not possible. Stepper voltage rating is irrelevant, but generally lower voltage & higher current stepper is better.

Unsuitable/non-optimum motors[edit | edit source]

  • Any non-permanent magnet motors: induction AC motor or DC motor with field coil - will not work
  • Cheapest grade DC motor, such as one extracted from power drill - might not give satisfying performance
  • Motor with very high voltage, such as 200 VAC AC servo motor - it will work if it has incremental encoder feedback, but maximum rotation speed is limited due to drive voltage. Consider Argon servo drive for motors above 100 volts rating.

Features[edit | edit source]

State of the Art[edit | edit source]

Control[edit | edit source]

Protections & Ruggedness[edit | edit source]

  • Safe torque off
  • Prevent machine damage via I²t (motor temperature modeling), blocked motion and tracking error detection
  • Industry leading ruggedness: over current, short circuit, over voltage, under voltage and over temperature protections, data/communication error detection
  • Warranty 24 months
  • Charge pump enable input for safety

Applications[edit | edit source]

  • Industrial servo & stepping motor control
  • Robotics
  • Industry 4.0 systems
  • Testing equipment
  • CNC
  • Haptics
  • Racing & flight simulators
  • Pick'n'place machines
  • Defense systems

Functionality and specifications[edit | edit source]

See main article IONI specifications.

Documentation & user guides[edit | edit source]

See the main article IONI & IONICUBE user guide.

Availability[edit | edit source]

Shipping worldwide at Granite Devices web shop.


In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.