Difference between revisions of "SimuCUBE LED indicators"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
(→SimuCUBE LED indicators) |
|||
| Line 15: | Line 15: | ||
|- | |- | ||
| LED3 || Green || Power on | | LED3 || Green || Power on | ||
| − | |Lit when on board | + | |Lit when on board 3.3V signal power is on |
|- | |- | ||
| LED4 || Green || Firmware controlled, TBA | | LED4 || Green || Firmware controlled, TBA | ||
Revision as of 10:48, 1 September 2017
SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.IONI
For IONI LED status indicators, please refer to IONI LED indicators.
SimuCUBE
SimuCUBE LED indicators
| LED # | Color | Indication | Technical information |
|---|---|---|---|
| LED3 | Green | Power on | Lit when on board 3.3V signal power is on |
| LED4 | Green | Firmware controlled, TBA | Connected to STM32F4 I/O pin PD15. |
| LED5 | Red | Firmware controlled, TBA | Connected to STM32F4 I/O pin PD14 |
| LED4 | Green | Firmware controlled, TBA | Connected to STM32F4 I/O pin PD13 |
