Difference between revisions of "Assembling SimuCUBE 320W kit"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
(Created page with "Assembled 320W SimuCUBE system. Assembling this is the goal of this document. This guide gives instructions of assembling a Granite D...")
 
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Simucube assembly 320w.jpg|thumb|Assembled 320W SimuCUBE system. Assembling this is the goal of this document.]]
+
{{SimucubeManualNav}}[[File:Simucube assembled 320w.jpg|thumb|Assembled 320W SimuCUBE system. Assembling this is the goal of this document.]]
 
This guide gives instructions of assembling a Granite Devices SimuCUBE kit for 320W power supply options. The kit of needed parts is available through [[Granite Devices web shop]] and also has been offered through [https://www.indiegogo.com/projects/simucube-force-feedback-from-the-future#/ SimuCUBE indiegogo campaign].
 
This guide gives instructions of assembling a Granite Devices SimuCUBE kit for 320W power supply options. The kit of needed parts is available through [[Granite Devices web shop]] and also has been offered through [https://www.indiegogo.com/projects/simucube-force-feedback-from-the-future#/ SimuCUBE indiegogo campaign].
  
{{Warning|Work in progress, this message will be removed after page is fully finished!.}}
+
See also [[SimuCUBE|List of SimuCUBE documentation]] for 480W/720W model kit assembly instructions and other guides.
{{Warning|Work in progress, this message will be removed after page is fully finished!.}}
+
 
{{Warning|Work in progress, this message will be removed after page is fully finished!.}}
+
{{docstatus|new|Status updated 29.6.2016.}}
  
 
==Tools and parts needed==
 
==Tools and parts needed==
Line 15: Line 15:
  
 
====== Parts (included in the full kit) ======
 
====== Parts (included in the full kit) ======
* SimuCUBE + IONI drive
+
*1 pc SimuCUBE + IONI drive
* 6 acrylic pieces for the case
+
* 6 pcs acrylic pieces for the case
* Meanwell RSP-320 power supply
+
*1 pc Meanwell RSP-320 power supply
* 2x M3x10 countersunk screw
+
* 2 pcs M3x10 countersunk screw
* 8x M4x8 button head screw
+
* 8 pcs M4x8 button head screw
* 4x M5x10 button head screw
+
* 4 pcs M5x10 button head screw
* 2x M3 locking nut
+
* 2 pcs M3 locking nut
* Schurter DC11.00001.003 IEC power socket ({{farnell|1207680}}, {{digikey|486-1963-ND}})
+
* 1 pc Schurter DC11.00001.003 IEC power socket ({{farnell|1207680}}, {{digikey|486-1963-ND}})
* 60x60x25mm cooling fan capable of starting at 5V
+
* 1 pc 60x60x25mm cooling fan capable of starting at 5V: Qualtek FAD1-06025BBLW12 ({{Digikey|Q620-ND}}).
* 1.5 mm^2 wire for electrical connections
+
* 50 cm of 1.5 mm^2 wire for electrical connections
* 1.5 mm^2 yellow-green wire for grounding
+
* 15 cm of 1.5 mm^2 yellow-green wire for protective earth (15 cm)
  
 
====== Optional ======
 
====== Optional ======
Line 37: Line 37:
 
1) Cut off the round parts from the acrylic back plate and save these for later. These will be used as spacers for the SimuCUBE motherboard.
 
1) Cut off the round parts from the acrylic back plate and save these for later. These will be used as spacers for the SimuCUBE motherboard.
  
[[File:big_case_spacers.png|thumbnail|480px|none]]
+
[[File:simucube_acrylic_spacers_common.png|thumbnail|480px|none]]
  
2) Attach grounding and mains wires to the power connector by either soldering them or by using the crimp terminals. If you don't have an access to proper crimp pliers for these type of terminals, then soldering is more preferred method to prevent wires from getting loose.
+
2) Attach grounding and mains wires to the power connector by either soldering them or by using the crimp terminals. If you don't have an access to proper crimp pliers for these type of terminals, then soldering is more preferred method to prevent wires from getting loose. Make wires 14-15 cm long.
  
 
[[File:20160613-DSC_3271.jpg|thumbnail|Mains power socket|480px|none]]
 
[[File:20160613-DSC_3271.jpg|thumbnail|Mains power socket|480px|none]]
Line 57: Line 57:
 
{| class="wikitable"
 
{| class="wikitable"
 
![[File:big_case_powerplug1.png|thumbnail|480px|none]]
 
![[File:big_case_powerplug1.png|thumbnail|480px|none]]
![[File:big_case_powerplug2.png|thumbnail|480px|none]]
+
![[File:small_case_powerplug2.png|thumbnail|480px|none]]
 
|}
 
|}
  
4) Put the two pieces of thin tape to the power supply as in the image (helps with assembly). Unscrew the marked screws to detach the DIN rail connector and the other marked screws. Follow the instructions with the type of power supply you have (SDR-480 or NDR-480).
+
5) Attach the back panel to the powersupply with two M4x8 button head screws (be careful, do not tighten too much!).
  
 
{| class="wikitable"
 
{| class="wikitable"
![[File:20160613-DSC_3257.jpg|thumbnail|Remove the three circled screws to detach the DIN rail mount|480px|none]]
+
![[File:small_case_back1.png|thumbnail|480px|none]]
![[File:20160613-DSC_3260.jpg|thumbnail|Put two pieces of thin tape to the positions shown in the photo to ease up the assembly later|480px|none]]
+
![[File:small_case_back2.png|thumbnail|480px|none]]
 
|}
 
|}
 
{| class="wikitable"
 
![[File:20160613-DSC_3265.jpg|thumbnail|Meanwell NDR-480|480px|none]]
 
![[File:20160613-DSC_3263.jpg|thumbnail|Remove the six circled screws (NDR-480)|480px|none]]
 
|}
 
 
{| class="wikitable"
 
![[File:20160613-DSC_3262.jpg|thumbnail|Meanwell SDR-480|480px|none]]
 
![[File:20160613-DSC_3261.jpg|thumbnail|Remove the six circled screws (SDR-480)|480px|none]]
 
|}
 
 
5) Attach the power supply to the back plate with four M3x10 button head screws (be careful, do not tighten too much!). Slide the bottom plate below the power supply (use the two screwless holes on the bottom of the PSU as a reference to align the bottom) and to the slots on the back plate and screw two M3x10 button head screws from the bottom.
 
 
{{Warning|Acrylic is very brittle material and breaks easily. Don't use much force when inserting or removing parts together (max 2 kg static pressure to push tenons together). If part are tight to fit together (which is can happen due to material tolerances), use a small file to loosen the tenons (round the corners of male part and enlarge the hole of female counterpiece).}}
 
 
{| class="wikitable"
 
![[File:big_case_power1.png|thumbnail|480px|none]]
 
![[File:big_case_power2.png|thumbnail|480px|none]]
 
|}
 
 
{{Tip|If you need to disassemble any acrylic joints, use a small flat headed screw driver to loosen each tenon progressively to separate panels. Pulling panel with force may break the acrylic panel.}}<br />
 
  
 
6) Connect grounding and mains wires to the power supply's screw terminal.
 
6) Connect grounding and mains wires to the power supply's screw terminal.
  
 
{| class="wikitable"
 
{| class="wikitable"
![[File:20160613-DSC_3248.jpg|thumbnail|Mains and ground wires attached to Meanwell NDR-480|480px|none]]
+
![[File:simucube_wiring_320w-kit.jpg|thumbnail|Wiring diagram for SimuCUBE motherboard + Meanwell RSP-320-48 (320W kit)|1000px|none]]
 
|}
 
|}
  
7) Attach IONI to the SimuCUBE motherboard by pressing it to the PCI-E-type connector. Align the motherboard onto the acrylic middle piece so that the edge of the connector edge of the circuit board is flush with the main edge of the acrylic (not the three protruding parts) and the holes line up. Use the four spacers cut from the acrylic back plate, four M4x16 screws and four locking nuts.
+
7) Attach IONI to the SimuCUBE motherboard by pressing it to the PCI-E-type connector. Use the four spacers cut from the acrylic back plate below the motherboard and fix it in place with four M4x8 button head screws.
  
 
{| class="wikitable"
 
{| class="wikitable"
![[File:big_case_middle1.png|thumbnail|480px|none]]
+
![[File:small_case_motherboard1.png|thumbnail|480px|none]]
![[File:big_case_middle2.png|thumbnail|480px|none]]
+
![[File:small_case_motherboard2.png|thumbnail|480px|none]]
 
|}
 
|}
  
8) Attach the 80mm fan on the acrylic side piece with four M5x10 button head screws, use the photo as a reference on which way the fan should be aligned. This configuration sucks air to the case and blows it towards the IONI and through the power supply.
+
8) Attach the 60mm fan on the acrylic side piece with four M5x10 button head screws, use the photo as a reference on which way the fan should be aligned. This configuration sucks air to the case and blows it towards the IONI and through the power supply.
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 108: Line 87:
 
|}
 
|}
  
9) Slide the motherboard assembly on top of the power supply and into the slots on the back of the case.
+
10) Attach positive (+48VDC) and negative wires between the power supply output and motherboard terminals.<br />
 
+
<br />
{| class="wikitable"
+
<b>See step 6 for the wiring diagram</b><br />
![[File:big_case_inside1.png|thumbnail|480px|none]]
+
<br />
![[File:big_case_inside2.png|thumbnail|480px|none]]
+
|}
+
 
+
10) Attach positive (+48VDC), negative and grounding wires between the power supply output and motherboard terminals. Crimp the fork terminal on the other end of the grounding cable and do a pull test to make sure it is crimped well.
+
 
+
{| class="wikitable"
+
![[File:20160613-DSC_3275.jpg|thumbnail|Grounding wire with a fork terminal attached|480px|none]]
+
![[File:20160613-DSC_3276.jpg|thumbnail|Grounding wire is attached under the screw near the voltage output terminals|480px|none]]
+
|-
+
![[File:20160613-DSC_3247.jpg|thumbnail|Positive, negative and ground connected to Meanwell NDR-480|480px|none]]
+
![[File:20160613-DSC_3246.jpg|thumbnail|Positive, negative and ground connected to the SimuCUBE motherboard|480px|none]]
+
|}
+
 
+
 
11) Attach the fan side plate in place and attach the fan wires to the quick terminal on the motherboard.
 
11) Attach the fan side plate in place and attach the fan wires to the quick terminal on the motherboard.
  
Line 131: Line 97:
 
|}
 
|}
  
12) Attach the two 10mm threaded cubes to the acrylic front plate with M3x6 button head screws and align the holes as shown on the image.
+
{{Warning|Acrylic is very brittle material and breaks easily. Don't use much force when inserting or removing parts together (max 2 kg static pressure to push tenons together). If part are tight to fit together (which is can happen due to material tolerances), use a small file to loosen the tenons (round the corners of male part and/or enlarge the hole of female counter piece).}}
  
{| class="wikitable"
+
13) Attach the left exhaust, bottom and top panels with the logo to the case and carefully wiggle the front plate in place. Attach the front panel with two M4x8 button head screws.
![[File:big_case_front1.png|thumbnail|480px|none]]
+
![[File:big_case_front2.png|thumbnail|480px|none]]
+
|}
+
 
+
13) Attach the left exhaust panel and top panel with the logo to the case and carefully wiggle the front plate in place. Screw one M3x6 button head screw from either side to the 10mm threaded cubes previously attached to the front plate.
+
  
 
{| class="wikitable"
 
{| class="wikitable"
![[File:big_case_whole1.png|thumbnail|480px|none]]
+
![[File:small_case_sides1.png|thumbnail|480px|none]]
![[File:big_case_whole2.png|thumbnail|480px|none]]
+
![[File:small_case_fanside.png|thumbnail|480px|none]]
 +
|-
 +
![[File:small_case_sides2.png|thumbnail|480px|none]]
 +
![[File:small_case_top.png|thumbnail|480px|none]]
 +
|-
 +
![[File:small_case_front1.png|thumbnail|480px|none]]
 +
![[File:small_case_front2.png|thumbnail|480px|none]]
 
|}
 
|}
  
14) Follow the [[SimuCUBE system user guide]] for usage
+
{{Tip|If you need to disassemble any acrylic joints, use a small flat headed screw driver to loosen each tenon progressively to separate panels. Pulling panel with force may break the acrylic panel.}}<br />
 +
 
 +
14) Follow the [[SimuCUBE end-user guide|SimuCUBE system user guide]] for usage
  
{{Next|[[SimuCUBE system user guide]]}}
+
{{Next|[[SimuCUBE end-user guide]]}}

Latest revision as of 11:52, 29 June 2016

Assembled 320W SimuCUBE system. Assembling this is the goal of this document.

This guide gives instructions of assembling a Granite Devices SimuCUBE kit for 320W power supply options. The kit of needed parts is available through Granite Devices web shop and also has been offered through SimuCUBE indiegogo campaign.

See also List of SimuCUBE documentation for 480W/720W model kit assembly instructions and other guides.

Tools and parts needed[edit | edit source]

Tools[edit | edit source]
  • Metric hex keys (2.5 + 3 + 4 mm)
  • Suitable wrench or pliers to hold M3 nuts
  • Small file, might be needed to touch off some of the laser cut tenons to ease up the assembly and prevent the use of excessive force
  • Suitable crimpers for wire terminals or a soldering iron
Parts (included in the full kit)[edit | edit source]
  • 1 pc SimuCUBE + IONI drive
  • 6 pcs acrylic pieces for the case
  • 1 pc Meanwell RSP-320 power supply
  • 2 pcs M3x10 countersunk screw
  • 8 pcs M4x8 button head screw
  • 4 pcs M5x10 button head screw
  • 2 pcs M3 locking nut
  • 1 pc Schurter DC11.00001.003 IEC power socket (Farnell 1207680
, Digikey 486-1963-ND)
  • 1 pc 60x60x25mm cooling fan capable of starting at 5V: Qualtek FAD1-06025BBLW12 (Digikey Q620-ND).
  • 50 cm of 1.5 mm^2 wire for electrical connections
  • 15 cm of 1.5 mm^2 yellow-green wire for protective earth (15 cm)
Optional[edit | edit source]
  • Gloves to prevent fingerprints on the acrylic parts while assembling the system
  • Wire end ferrules
  • Heat shrink tubing

Assembly[edit | edit source]

1) Cut off the round parts from the acrylic back plate and save these for later. These will be used as spacers for the SimuCUBE motherboard.

Simucube acrylic spacers common.png

2) Attach grounding and mains wires to the power connector by either soldering them or by using the crimp terminals. If you don't have an access to proper crimp pliers for these type of terminals, then soldering is more preferred method to prevent wires from getting loose. Make wires 14-15 cm long.

Mains power socket
Wires soldered to the connector
Heat shrink tubing to cover up the contacts
Wires with terminals attached
Terminals attached to the plug terminals

3) Fix the power plug to the acrylic back plate with M3x10 countersunk screws and M3 locking nuts.

Big case powerplug1.png
Small case powerplug2.png

5) Attach the back panel to the powersupply with two M4x8 button head screws (be careful, do not tighten too much!).

Small case back1.png
Small case back2.png

6) Connect grounding and mains wires to the power supply's screw terminal.

Wiring diagram for SimuCUBE motherboard + Meanwell RSP-320-48 (320W kit)

7) Attach IONI to the SimuCUBE motherboard by pressing it to the PCI-E-type connector. Use the four spacers cut from the acrylic back plate below the motherboard and fix it in place with four M4x8 button head screws.

Small case motherboard1.png
Small case motherboard2.png

8) Attach the 60mm fan on the acrylic side piece with four M5x10 button head screws, use the photo as a reference on which way the fan should be aligned. This configuration sucks air to the case and blows it towards the IONI and through the power supply.

Big case fan1.png
Big case fan2.png

10) Attach positive (+48VDC) and negative wires between the power supply output and motherboard terminals.

See step 6 for the wiring diagram

11) Attach the fan side plate in place and attach the fan wires to the quick terminal on the motherboard.

Fan wires attached to the motherboard


13) Attach the left exhaust, bottom and top panels with the logo to the case and carefully wiggle the front plate in place. Attach the front panel with two M4x8 button head screws.

Small case sides1.png
Small case fanside.png
Small case sides2.png
Small case top.png
Small case front1.png
Small case front2.png

14) Follow the SimuCUBE system user guide for usage