Difference between revisions of "SimuCUBE LED indicators"

From Granite Devices Knowledge Wiki
Jump to: navigation, search
[checked revision][checked revision]
m (SimuCUBE LED indicators)
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
{{SimucubeManualNav}}SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.
 +
 
== IONI ==
 
== IONI ==
 
For IONI LED status indicators, please refer to [[IONI & IONICUBE user guide/LED indicators|IONI LED indicators]].
 
For IONI LED status indicators, please refer to [[IONI & IONICUBE user guide/LED indicators|IONI LED indicators]].
  
 
== SimuCUBE ==
 
== SimuCUBE ==
{{picturebox|simucube_LED_indicators.jpg|caption=SimuCUBE LED indicators.}}
+
[[File:simucube_LED_indicators.jpg|thumb|800px|center|SimuCUBE LED indicators.]]
  
 
=== SimuCUBE LED indicators===
 
=== SimuCUBE LED indicators===
Line 10: Line 12:
 
|-
 
|-
 
!  LED # !! Color || Indication
 
!  LED # !! Color || Indication
 +
!Technical information
 
|-
 
|-
| LED3 || Green || +3.3 V logic voltage is ok.
+
| LED3 || Green || Power on
 +
|Lit when on board 3.3V signal power is on
 
|-
 
|-
| LED4 || Green || FirmWare related. Connected to STM32F4 I/O pin PD15. Mmos: torque clipping.
+
| LED4 || Green || MMOS: Clipping led. SimuCUBE Firmware: Clipping led.
 +
|Connected to STM32F4 I/O pin PD15.
 
|-
 
|-
| LED5 || Red || Firmware related. Connected to STM32F4 I/O pin PD14.
+
| LED5 || Red || Firmware controlled, TBA
 +
|Connected to STM32F4 I/O pin PD14
 
|-
 
|-
| LED4 || Green || Firmware related. Connected to STM32F4 I/O pin PD13.
+
| LED6 || Green || Firmware controlled, TBA
 +
|Connected to STM32F4 I/O pin PD13
 
|}
 
|}
  
 
+
[[Category:SimuCUBE_user_guide]]
{{next|[[:Category:SimuCUBE troubleshooting|Troubleshooting]]}}
+
[[Category:SimuCUBE]]

Latest revision as of 13:20, 28 February 2018

SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.

IONI[edit | edit source]

For IONI LED status indicators, please refer to IONI LED indicators.

SimuCUBE[edit | edit source]

SimuCUBE LED indicators.

SimuCUBE LED indicators[edit | edit source]

LED # Color Indication Technical information
LED3 Green Power on Lit when on board 3.3V signal power is on
LED4 Green MMOS: Clipping led. SimuCUBE Firmware: Clipping led. Connected to STM32F4 I/O pin PD15.
LED5 Red Firmware controlled, TBA Connected to STM32F4 I/O pin PD14
LED6 Green Firmware controlled, TBA Connected to STM32F4 I/O pin PD13