SimuCUBE LED indicators

From Granite Devices Knowledge Wiki
Jump to: navigation, search
SimuCUBE system has two sets of leds: one set on SimuCUBE board and another set in the plugged IONI drive.

IONI

For IONI LED status indicators, please refer to IONI LED indicators.

SimuCUBE

SimuCUBE LED indicators.

SimuCUBE LED indicators

LED # Color Indication Technical information
LED3 Green Power on Lit when on board 5V signal power is on
LED4 Green Firmware controlled, TBA Connected to STM32F4 I/O pin PD15.
LED5 Red Firmware controlled, TBA Connected to STM32F4 I/O pin PD14
LED4 Green Firmware controlled, TBA Connected to STM32F4 I/O pin PD13

In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.

As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.

Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.