Difference between revisions of "About SimuCUBE"

Revision as of 13:22, 25 May 2016 (edit) Esa (Talk | contribs) m (Esa moved page SimuCUBE to SimuCUBE user guide/SimuCUBE) ← Older edit		Latest revision as of 21:12, 4 March 2018 (edit) (undo) Mtakala (Talk | contribs) m
(15 intermediate revisions by 3 users not shown)
Line 2:		Line 2:
	| name = SimuCUBE		| name = SimuCUBE
	| image=[[File:Simucube_photo.jpg|290px]]		| image=[[File:Simucube_photo.jpg|290px]]
−	| modelno = SimuCUBE 1r004	+	| modelno = SimuCUBE 1R004
−	| drivetype         = Single axis motherboard for [[IONI]] drives	+	| drivetype = Single axis motherboard for [[IONI]] drives with force feedback functionality
−	| motors = AC, DC, BLDC, Linear, Stepper	+	| motors = AC, DC, BLDC, Stepper
−	| controlmodes = Position, Velocity, Torque	+	| controlmodes = Torque control
−	| voltage= Same as [[IONI]] specifications	+	| voltage= 20 - 49  VDC
	| production = Active production, started 2016		| production = Active production, started 2016
	| agencies=CE (EMC & LVD directives)		| agencies=CE (EMC & LVD directives)
	| 3dmodel=TBA		| 3dmodel=TBA
−	}}{{SimucubeManualNav|width=22em|notoc=1}}	+	| url=[https://granitedevices.com/simucube-simulator-force-feedback-controller/ SimuCUBE]
		+	}}{{SimucubeManualNav|width=22em|notoc=1}}[[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px]]SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel or a force feedback lever. Typical SimuCUBE applications include vehicle and equipment simulators.
−	SimuCUBE is a state-of-the-art direct drive force feedback controller. Essentially a motherboard for an [[IONI]] servo drive, the SimuCUBE offers easiest solution and the best price-quality ratio for simulator professionals and enthusiasts.	+	SimuCUBE is is a modular device where motor is being controlled by an [[IONI Servo & Stepper Drive]] (sold separately) and torque [[Setpoint]] generation is being done by on-board dedicated 32 bit ARM microcontroller.
−	For detailed information, please refer to the SimuCUBE user guide, located on the right side of this page.	+	To browser detailed information, please refer to the SimuCUBE pages, located on the right side of this page.
−	{{warning|This section is unfinished. Don't use until this notice is removed.}}	+	==How SimuCUBE helps simulator builds==
−		+	The main function SimuCUBE is to aid implementing [[Force feedback system (FFB)]] such as simulator steering wheel or other motorized actuator. SimuCUBE main contributions in this area are:
−	==Features==	+	* Modular design: SimuCUBE is a motherboard with force feedback controller where [[IONI Servo & Stepper Drive]] plugs in as a motor driver
−	SimuCUBE has been designed around the [[IONI]] servo drive, and the features include:	+	* Drive motors up to 30 Nm torque
−	* Open Sim Wheel made easy	+	* High fidelity feedback achieved by real-time force effect generation on hardware
−	* Elegant acrylic enclosures ready for 320 W and 480/720 W power supplies	+	* Eased installation
−	** Silent 480 W and 720 W (peak) PSU options	+	** Single 20 - 49 V DC supply (switching and linear power supply compatible)
−	* Connectors for buttons and analog-to-digital converters (for pedals and other analog controls)	+	** Direct USB connectivity (USB HID game controller device with Microsoft DirectInput compatibility)
−	* Up to 25 A continuous current with IONI Pro HC	+	** Connect external pedals, buttons and levers to the four on-board RJ45 connectors
−	* On-board [[regenerative resistor|regenerative braking resistor]]	+	* Modern acrylic enclosures for SimuCUBE are readily available
−	* On board ARM processor will run the FFB firmware of user choice	+	* Allow customer specific extensions due to open source hardware and firmware
−		+	For further introduction, see [https://granitedevices.com/simucube-simulator-force-feedback-controller/ SimuCUBE product page].
−	[[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px|center]]	+
−		+
−	==The Core - IONI==	+
−	IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers.	+
−		+
−	For detailed information, plese refer to following pages:	+
−	:* [[IONI Servo & Stepper Drive]]	+
−	:* [[IONI specifications]]	+
−	:* [[IONI device model comparison]]	+
−		+
−	==Links and miscellaneous notes==	+
−	If you are not using a ready configuration file for Granity, then please read servo tuning basics and torque tuning very carefully to get the idea how it's done. Every servo type requires specific parameters.	+
−	:* [[Servo tuning basics]]	+
−	:* [[Tuning torque controller]]	+
−		+
−	Please read also these pages to get the best possible experience of a SimuCUBE FFW system.	+
−	:* [[Granity]]	+
−	:* [[EMI suppression cores]]	+
	==Availability==		==Availability==
−	Please refer to the [https://granitedevices.com/store/applications/simulators/simucube-force-feedback-controller-board.html SimuCUBE web store page] for the current stock status.	+	See [https://granitedevices.com/store/applications/simulators/simucube-force-feedback-controller-board.html SimuCUBE web store page] for the current stock status, pricing and ordering.
−	{{next|[[SimuCUBE specifications|Specifications]]}}	+	== Safety information ==
		+	Read the following info box carefully:{{simucubewarnings}}
	[[Category:SimuCUBE]]		[[Category:SimuCUBE]]
		+	[[Category:SimuCUBE_user_guide]]

---

Latest revision as of 21:12, 4 March 2018

SimuCUBE
Device type	Single axis motherboard for IONI drives with force feedback functionality
Model number	SimuCUBE 1R004
Supported motors	AC, DC, BLDC, Stepper
Control modes	Torque control
Status	Active production, started 2016
Electrical
DC supply voltage	20 - 49 VDC
General
Web site	SimuCUBE
Compliance	CE (EMC & LVD directives)
3D model	TBA

SimuCUBE documentation

---

SimuCUBE main board information

• About SimuCUBE
• Technical specifications
• List of hardware needed
• Connector pinouts and wiring
• LED status indicators

SimuCUBE acrylic enclosures

• Assembling SimuCUBE 320W kit
• Assembling SimuCUBE 480W/720W kit

SimuCUBE install guide

• PART 0: Overview
• PART 1: Connecting motor
• PART 2: Motor configuration
• PART 3: Installing firmware
• PART 4: Connecting pedals and buttons

Extra information

• Troubleshooting
• Glossary

SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel or a force feedback lever. Typical SimuCUBE applications include vehicle and equipment simulators.

SimuCUBE is is a modular device where motor is being controlled by an IONI Servo & Stepper Drive (sold separately) and torque Setpoint generation is being done by on-board dedicated 32 bit ARM microcontroller.

To browser detailed information, please refer to the SimuCUBE pages, located on the right side of this page.

How SimuCUBE helps simulator builds[edit | edit source]

The main function SimuCUBE is to aid implementing Force feedback system (FFB) such as simulator steering wheel or other motorized actuator. SimuCUBE main contributions in this area are:

• Modular design: SimuCUBE is a motherboard with force feedback controller where IONI Servo & Stepper Drive plugs in as a motor driver
• Drive motors up to 30 Nm torque
• High fidelity feedback achieved by real-time force effect generation on hardware
• Eased installation
  • Single 20 - 49 V DC supply (switching and linear power supply compatible)
  • Direct USB connectivity (USB HID game controller device with Microsoft DirectInput compatibility)
  • Connect external pedals, buttons and levers to the four on-board RJ45 connectors
• Modern acrylic enclosures for SimuCUBE are readily available
• Allow customer specific extensions due to open source hardware and firmware

For further introduction, see SimuCUBE product page.

Availability[edit | edit source]

See SimuCUBE web store page for the current stock status, pricing and ordering.

Safety information[edit | edit source]

Read the following info box carefully:

SimuCUBE based Force feedback system (FFB) pose high mechanical danger that may cause serious injuries to living beings, cause damage to external property or loss of profits. Always operate SimuCUBE based system with maximal caution. Beware of very high sudden torques or vibrations produced by motor attached to SimuCUBE - these are expected even in normal operating conditions Be aware that malfunction of misconfiguration may cause uncontrolled or higher than normal motor rotation or torques End-user's responsibility is to ensure that motor, or items connected to the motor can not cause damage due to rotation, torque or vibration Always be ready to let go from the motor or parts connected to it (i.e. take hands off the simulator wheel) Make sure that a reliable stopping method is available and user reachable at all times (reliable method: unplugging AC power). Note that unplugging power might not stop motor immediately. Do not try to stop spinning motor by hands or other mechanical means Note that wheel, cables or other items attached to motor may hit objects or living beings and may have damaging effects. User's responsibility is to control this danger and take responsibility of the possible consequences caused by moving items. Ensure that motor has been rigidly fixed to avoid it getting loose under extreme vibrations Understand that the responsibilities of the manufacturer of the SimuCUBE are limited to fulfilling the technical specifications and functions of the device. The technical function includes production of high torques and speeds on a large motor. Understand that spinning motor or high torques produced by it are considered operation within specifications, so potential damages caused by such operation are not within liabilities of the manufacturer. Commonly used motors may exceed torque of 30 Newton meters and rotation speed of 1000 rpm when attached to SimuCUBE Due to high electric currents, motor, cables or IONI drive may get dangerously hot (skin burns, fire hazard) For your own safety, do not operate SimuCUBE if you don't understand these dangers