SimuCUBE hardware requirements
| Item | Quantity | Links / sources | Notes |
|---|---|---|---|
| SimuCUBE | 1 | Web store | |
| IONI Pro or IONI Pro HC | 1 | Web store | Decide drive model based on the required current to the motor. To compare IONI models, see IONI device model comparison. Suggestions:
|
| 24 to 48 VDC power supply, recommended 300 W minimum | 1 |
|
IONI drive has feature called "power consumption limit" which allows using also undersized power supplies without causing errors. However, if power consumption limit activates, then produced torque will be also reduced. |
| Servo motor | 1 | List of motors for SimuCUBE | Recommended at least 15 Nm peak torque for direct drive wheel applications. Check motor specifications the required current. IONI Pro HC can output 25 A (peak of sine) current, which equals 17.7 A RMS current (note that AC motor manufacturers typically give current rantings as RMS value). |
| Mini USB cables (from USB A to USB Mini B) | 1-2 | Digikey 1175-1053-ND | SimuCUBE has two Mini USB ports, one for USB HID (force feedback interface) and one for Granity connection. One cable is sufficient but requires swapping cable between the ports during configuration step. Two cables are recommended. |
| 15 pin (two row type) D-Sub male connector + connector hood (cover) | 1 | List of D-Sub 15 pin connector parts | This is the mating connector for encoder port of SimuCUBE, get these unless your motor comes with SimuCUBE/IONI/Argon compatible pre-made encoder cable. |
| Compatible firmware (software) | 1 |
|
MMos firmware is available from various internet sites/forums. |
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
