Difference between revisions of "About SimuCUBE"
From Granite Devices Knowledge Wiki
| [checked revision] | [checked revision] |
(Tag: VisualEditor) |
|||
| Line 2: | Line 2: | ||
| name = SimuCUBE | | name = SimuCUBE | ||
| image=[[File:Simucube_photo.jpg|290px]] | | image=[[File:Simucube_photo.jpg|290px]] | ||
| − | | modelno = SimuCUBE | + | | modelno = SimuCUBE 1R004 |
| − | | drivetype | + | | drivetype = Single axis motherboard for [[IONI]] drives with force feedback functionality |
| − | | motors = AC, DC, BLDC | + | | motors = AC, DC, BLDC, Stepper |
| − | | controlmodes = | + | | controlmodes = Torque control |
| voltage= Same as [[IONI]] specifications | | voltage= Same as [[IONI]] specifications | ||
| production = Active production, started 2016 | | production = Active production, started 2016 | ||
| agencies=CE (EMC & LVD directives) | | agencies=CE (EMC & LVD directives) | ||
| 3dmodel=TBA | | 3dmodel=TBA | ||
| + | | www=[https://granitedevices.com/simucube-simulator-force-feedback-controller/ SimuCUBE] | ||
}}{{SimucubeManualNav|width=22em|notoc=1}}[[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px]]SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel or a force feedback lever. Typical SimuCUBE applications include vehicle and equipment simulators. | }}{{SimucubeManualNav|width=22em|notoc=1}}[[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px]]SimuCUBE is a complete simulator force feedback controller for single motorized actuator such as a steering wheel or a force feedback lever. Typical SimuCUBE applications include vehicle and equipment simulators. | ||
Revision as of 22:25, 28 June 2016
| SimuCUBE | |
|---|---|
 | |
| Device type | Single axis motherboard for IONI drives with force feedback functionality |
| Model number | SimuCUBE 1R004 |
| Supported motors | AC, DC, BLDC, Stepper |
| Control modes | Torque control |
| Status | Active production, started 2016 |
| Electrical | |
| DC supply voltage | Same as IONI specifications |
| General | |
| Compliance | CE (EMC & LVD directives) |
| 3D model |
TBA |
SimuCUBE is is a modular device where motor is being controlled by an IONI Servo & Stepper Drive (sold separately) and torque Setpoint generation is being done by on-board dedicated 32 bit ARM microcontroller.
To browser detailed information, please refer to the SimuCUBE pages, located on the right side of this page.
 | This page is work in progress state. Do not use any of this information until this notice has been removed. Status updated 26.6.2016. |
Contents
Features
SimuCUBE has been designed around the IONI servo drive, and the features include:
- Open Sim Wheel made easy
- Elegant acrylic enclosures ready for 320 W and 480/720 W power supplies
- Silent 480 W and 720 W (peak) PSU options
- Connectors for buttons and analog-to-digital converters (for pedals and other analog controls)
- Up to 25 A continuous current with IONI Pro HC
- On-board regenerative braking resistor
- On board ARM processor will run the FFB firmware of user choice
The Core - IONI
IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers.
For detailed information, plese refer to following pages:
Links and miscellaneous notes
If you are not using a ready configuration file for Granity, then please read servo tuning basics and torque tuning very carefully to get the idea how it's done. Every servo type requires specific parameters.
Please read also these pages to get the best possible experience of a SimuCUBE FFW system.
Availability
Please refer to the SimuCUBE web store page for the current stock status.
Safety information
Read the following info box carefully:
 | SimuCUBE based Force feedback system (FFB) pose high mechanical danger that may cause serious injuries to living beings, cause damage to external property or loss of profits. Always operate SimuCUBE based system with maximal caution.
|
 | Read next |
