Difference between revisions of "About SimuCUBE"
| [checked revision] | [checked revision] |
| Line 18: | Line 18: | ||
==Features== | ==Features== | ||
SimuCUBE has been designed around the [[IONI]] servo drive, and the features include: | SimuCUBE has been designed around the [[IONI]] servo drive, and the features include: | ||
| + | * Open Sim Wheel made easy. | ||
| + | * Elegant enclosures ready for 320 W and 480 W PSU. | ||
| + | * Silent 480 W and 720 W (peak) PSU options. | ||
| + | * Connectors for buttons, analog-to-digital converters (for brake, clutch, throttle, etc). | ||
* Up to 25 A continuous current with IONI Pro HC. | * Up to 25 A continuous current with IONI Pro HC. | ||
* On-board [[regenerative resistor|regenerative braking resistor]]. | * On-board [[regenerative resistor|regenerative braking resistor]]. | ||
| − | * On board ARM processor will run the FFB firmware of user choice | + | * On board ARM processor will run the FFB firmware of user choice. |
| − | + | ||
[[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px|center]] | [[File:Simucube chart.png|thumb|Simplified chart of a SimuCUBE FFB simulator setup.|400px|center]] | ||
| + | |||
| + | ==The Core - IONI== | ||
| + | IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. | ||
| + | |||
| + | For detailed information, plese refer to following pages: | ||
| + | :* [[IONI Servo & Stepper Drive]] | ||
| + | :* [[IONI specifications]] | ||
| + | :* [[IONI device model comparison]] | ||
==Links and miscellaneous notes== | ==Links and miscellaneous notes== | ||
Revision as of 13:19, 12 May 2016
| SimuCUBE | |
|---|---|
 | |
| Device type | Single axis motherboard for IONI drives |
| Model number | SimuCUBE |
| Supported motors | AC, DC, BLDC, Linear, Stepper |
| Control modes | Position, Velocity, Torque |
| Status | Active production, started 2016 |
| Electrical | |
| DC supply voltage | Same as IONI specifications |
| General | |
| Compliance | CE (EMC & LVD directives) |
| 3D model |
TBA |
SimuCUBE is a state-of-the-art direct drive force feedback controller. Essentially a motherboard for an IONI servo drive, the SimuCUBE offers easiest solution and the best price-quality ratio for simulator professionals and enthusiasts.
 | This section is unfinished. Don't use until this notice is removed. |
Features
SimuCUBE has been designed around the IONI servo drive, and the features include:
- Open Sim Wheel made easy.
- Elegant enclosures ready for 320 W and 480 W PSU.
- Silent 480 W and 720 W (peak) PSU options.
- Connectors for buttons, analog-to-digital converters (for brake, clutch, throttle, etc).
- Up to 25 A continuous current with IONI Pro HC.
- On-board regenerative braking resistor.
- On board ARM processor will run the FFB firmware of user choice.
The Core - IONI
IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers.
For detailed information, plese refer to following pages:
Links and miscellaneous notes
If you are not using a ready configuration file for Granity, then please read servo tuning basics and torque tuning very carefully to get the idea how it's done. Every servo type requires specific parameters.
Please read also these pages to get the best possible experience of a SimuCUBE FFW system.
Availability
Coming soon to our web store.
