About SimuCUBE
| SimuCUBE | |
|---|---|
 | |
| Device type | Single axis motherboard for IONI drives |
| Model number | SimuCUBE 1r004 |
| Supported motors | AC, DC, BLDC, Linear, Stepper |
| Control modes | Position, Velocity, Torque |
| Status | Active production, started 2016 |
| Electrical | |
| DC supply voltage | Same as IONI specifications |
| General | |
| Compliance | CE (EMC & LVD directives) |
| 3D model |
TBA |
SimuCUBE is a state-of-the-art direct drive force feedback controller. Essentially a motherboard for an IONI servo drive, the SimuCUBE offers easiest solution and the best price-quality ratio for simulator professionals and enthusiasts.
For detailed information, please refer to the SimuCUBE user guide, located on the right side of this page.
 | This section is unfinished. Don't use until this notice is removed. |
Features
SimuCUBE has been designed around the IONI servo drive, and the features include:
- Open Sim Wheel made easy
- Elegant acrylic enclosures ready for 320 W and 480/720 W power supplies
- Silent 480 W and 720 W (peak) PSU options
- Connectors for buttons and analog-to-digital converters (for pedals and other analog controls)
- Up to 25 A continuous current with IONI Pro HC
- On-board regenerative braking resistor
- On board ARM processor will run the FFB firmware of user choice
The Core - IONI
IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers.
For detailed information, plese refer to following pages:
Links and miscellaneous notes
If you are not using a ready configuration file for Granity, then please read servo tuning basics and torque tuning very carefully to get the idea how it's done. Every servo type requires specific parameters.
Please read also these pages to get the best possible experience of a SimuCUBE FFW system.
Availability
Please refer to the SimuCUBE web store page for the current stock status.
 | Read next |
In no event the Product Information or parts hereof shall be regarded as guarantee of conditions or characteristics. The Product Information or any part thereof may also not be regarded as a warranty of any kind. No liability of any kind shall be assumed by Author with respect to Product Information or any use made by you thereof, nor shall Author indemnify you against or be liable for any third party claims with respect to such information or any use thereof.
As content of this Wiki may be edited by user community, Granite Devices Oy or it's affiliates do not take any responsibility of the contents of this Wiki. Use information at your own risk. However, Granite Devices staff attempts to review all changes made to this Wiki and keep information trustworthy.
Without written consent, Granite Devices' Products or Intellectual Property shall not be used in situations or installations where living beings, material property, or immaterial property could be harmed by the operation, features or failures of Product. Products may only be used in a way where hazards like moving parts, electric shock, laser radiation, or fire can't be realized even if the content of this Wiki would suggest otherwise.
